Jump to content
SAU Community

Recommended Posts

Its not a vented catch can. Considering she is track only it will be checked throughout the day, and also before and after each track day. Have got the windows installed. Shall put some pics up when i get home. Makes it look like almost a complete car. Just need some new spark plugs and some new fuel. Plus the plexi glass quarters and sunroof. Shes got a little bit of smoke on start up and while running. Smells a little oily. I think maybe the 33 turbo seals might be rat poo. Hope not i at least want to get one track day out of her before spending any more money on engine lol.

And yes pete you are a sexy mountain of a man ;)

So at the moment that little brass bit is still open. Not sure where that could have gone before as the can is second hand. better to maybe merge the 2 rockers together before catch can and then vent to atmo??

frontscreen_zps3dec5a48.jpg

rearscreen_zps886f260d.jpg

yah pretty close lol. If i could put up with excessive wind noise i could take it out lol, and as long as its not raining. Plexi glass will be ordered next week as i now have a template for the quarters. Thinking of getting them done professionally then if any other SAU members want to grab a set the template will already be there.

  • 1 month later...

So just entered the SAU day for Sydney motorsport park so i now have a true deadline of october 29th to get her ready. So went on a mission at lunch dropped the templates off to Smithfield plastics to get the lexen quarter windows and sunroof. For only $155 needed to cover all 3 its a pretty damn good price fully laser cut to within the mm. So just need to modify the front bar to fit round the cooler and get a filter to vent the catch can and shes ready to go! Bring on the 29th of october lol!

So picked up the lexan today. Looks great ready for install soon. Then she will be ready for her first wash in god knows how long lol. Heres some picks, the stock glass window is on the left as a template :)

32q2_zps1184413e.jpg

Comparing thickness

The weight difference is crazy as u can imagine. Can just think of how much is saved in the sunroof alone without all the motor and everything else :)

32q1_zps22212515.jpg

So motivated me alot more now that ive entered her in the track day. Brought a quick release steering wheel kit. LOVE IT! Authentic race car now lol. Also ordered some aero mirrors from GKTECK for only $99 bucks new cant beat em should arrive tomorrow or Monday. Then need to organise an extinguisher, trim the front bar and give a good check over. Here's some more pretty pics :)

wheel1_zpse2fdcf7a.jpg

wheeloff_zpsb2db69e0.jpg

So got the front bar done today during lunch, really dodgy trim job but ill eventually neaten it when i go to paint it. Makes the car look alot more complete. also fitted aero mirrors you can see. Cheap $100 so good.

baron_zpsee35b75b.jpg

  • 2 weeks later...

Hey mate, read the build from the start, great write up.

With it getting increasingly difficult to keep a fun track car road registered, ive decided to do the same thing. Couldnt decide between a 32 and a s13/180 and probably still wont untill i've got the cash in my hand but your build has definately motivated me to make up my mind and get into it...

Keep the updates comin

Thanks mate, yah i loved having my 33 as a Daily/track car but after getting some water leak issues after the last eastern creek day i had im glad i started to build this one. If I hadn't found this $400 shell the 33 would still probably be a daily/Track and with the 4G ive roughly put into this one i could have had a very quick GtsT. But With the 32 I can take her on the track and flog the crap out of her and not worry if i hit a wall or break something because it wont need fixing straight away :)

The RB20 with the straight through exhaust even with the cannon atm sound salmost as sweet as my 33 does with its new hi flow. Just something about the 2L straight 6 that makes them sound so unique.

So got the Lexan in today. The car looks complete :) Just need the little L brackets made up with some small angle bar for the sunroof and she will be complete. Although on a beautiful sunny day like today a sunroof wont be required :P Heres a pic of the windows in place. Now just time almost for her first wash and ready to hit up eastern creek :) Along with putting on some fancy "TOW" and battery stickers Cause racecar :P

window_zpse5508284.jpg

  • 1 month later...

So got the sunroof in today. Note to self next time when getting sunroof made from plexi get 6mm not 3mm. Its to flexible and sags :( But doesnt need to be to waterproof as its parked inside unless being used lol. Just need to seel it up a bit better with rubber or silicon. Hoping i wont need it for track day ill just take it out. Heres a pick. Also got extinguisher put in :) And put some stickers on for the battery triangle and tow points.

sunroofin_zpsc15933cd.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...