Jump to content
SAU Community

Recommended Posts

Going through and reading pages on pages of info, I'm getting confused...

With basic bolt ones, injectors, exhaust, power fc etc

Which GTR is the quickest straight line? 32 33 or 34?

Does it just come down to the 32 being the lightest? Or does the 34 make up for it being newer etc etc??

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/
Share on other sites

Going through and reading pages on pages of info, I'm getting confused...

With basic bolt ones, injectors, exhaust, power fc etc

Which GTR is the quickest straight line? 32 33 or 34?

Does it just come down to the 32 being the lightest? Or does the 34 make up for it being newer etc etc??

Yes you certainly are confused.

The one with the most power/torque and least weight will win if all other variables are the same.

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300690
Share on other sites

No of course kw all being the same etc. But if you bolt the same mods on each of the models you won't get the same torque and kws correct?

Then take weight into account etc??

Lol can't afford a 35 and not keen on a 31...

32 33 or 34

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300702
Share on other sites

No of course kw all being the same etc. But if you bolt the same mods on each of the models you won't get the same torque and kws correct?

There is no golden answer other than this:

The one with the most power/torque and least weight will win if all other variables are the same.

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300792
Share on other sites

I kno each car would be different car from car even in the same model.

But there must be something like a tune with basic bolt ones a 34 will be quicker or the 32 won't have as many kws but much lighter. So quicker in a straight line and on the track etc

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300811
Share on other sites

this is my personal view on the topic...

if all 3 were brand new and had identical mods done, including supporting mods, they would all end up with about the same power.

if you then gave them all the same power, same gear ratios, same WEIGHT - then they will go as well as either or.

so in the end, engine condition, weight, ratios in no order make up the winning combo assuming power is equal.

k, done. lock.

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300835
Share on other sites

Yer but do you need more money and parts to make a 32 rb26 put out the same as a r34rb26?

What I'm saying is I spend $2000 on a power fc some injectors and a tune and your saying all 3 models will put

Out roughly the same kws? Etc

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300842
Share on other sites

What's so good about the 33 system?

Exhaust manifolds, aftermarket dumps and front popes are common between all 3 ( except for the O2 sensor bung sizes in the 32 and EGT temp probe in the V Spec and above versions of the 34). It's common knowledge that a 33 GTR cat back will bolt into a 34 with a few minor hanger changes and a bee's dick shorter.

So, where does this magical 30 HP come from?

Wouldn't it also depend if it was a 300 HP car or a 1300 HP car?

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300845
Share on other sites

So, where does this magical 30 HP come from?

The cosmos of course

I kno each car would be different car from car even in the same model.

But there must be something like a tune with basic bolt ones a 34 will be quicker or the 32 won't have as many kws but much lighter. So quicker in a straight line and on the track etc

How?

The R34 is heavier. The R33 is heavier.

So once again....

The one with ... least weight will win if all other variables are the same.

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300873
Share on other sites

What's so good about the 33 system?

Exhaust manifolds, aftermarket dumps and front popes are common between all 3 ( except for the O2 sensor bung sizes in the 32 and EGT temp probe in the V Spec and above versions of the 34). It's common knowledge that a 33 GTR cat back will bolt into a 34 with a few minor hanger changes and a bee's dick shorter.

So, where does this magical 30 HP come from?

Wouldn't it also depend if it was a 300 HP car or a 1300 HP car?

L2belessserious

Lol

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300877
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
×
×
  • Create New...