Jump to content
SAU Community

Recommended Posts

  • Replies 7.5k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Steve,

Nankang NS2's simply... suck. :D

I had a mates 245/40/18 nankangs on my R32; straight line grip was worse than my el cheapo 225/50/16's and cornering was very understeery. They were basically new tyres. OH and they were super slippery in the wet both straight line and cornering.

That is compared to my 225/50/16 Federal 535's which are cheap tyres in their own right.

Purely for their poor wet weather performance I wouldn't touch them.

BUT a set of new Nankangs will still grip better than a stuffed set of better tyres so either way they will feel better than what tyres your running now. :)

I'd look at something else.

Ah cheers for feedback joel just sang him and told him iv.e changed my mind again :D he be sick of me by the end of the day lol he said he will do a ring around and see what other skylines are running and get me a decent cheap but good wearing tire the ultimate paradox

I had Federals on the second hand set of 33 stocker rims when i first purchased them, and i must say, they lasted me the longest out of all the 225/50/16 tyres ive ever put on the 33! ... Khumo, Nankang, BobJane, Michelin all lasted nowhere near as long.

Performance/Grip is another thing tho eh!

Edited by MSPEC33
saw cara's 34 the last couple of days out the front of clipsol

yeah i was working in the kitchen on tues and wed.

spotted a white r34 with black rims/nismo front turning from henley beach rd onto south rd, and also on south rd spotted a white with pearl r34 4 door...............looked very nice ;)

Longest lasting tyres... The no longer Simex. They used to be fairly grippy when new but quickly went slippery.

I've had sava's; they chew out really quick and don't offer the same levels of grip in dry and wet that the cheapo federal 535's do.

I don't believe you can get the 535's in the 17's so you may be stuck with 595's which by all means are an awesome tyre but no doubt cost a little more.

As I said.. I was unbelievably disappointed with the NS2 245's; I couldn't believe a cheap 225 would hook up better than Nankangs flagship tyre. :S

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...