Jump to content
SAU Community

Recommended Posts

No new graphs mate, I really should get one, LOL.

When I get my fuel system sorted (was >75% duty at 414 I think from memory) and run 30psi through the TO4Z Ill get one to post up.

Maybe next year

They have taken a fair amount of material out around the valves!

I spose because they are 1.5 mm OS. The head was originally modified for the 1.0's. After it came back from NAPREC Hiroyuki took out a bee's dick more for the extra 0.5mm.

See how it goes eh?

Crank and pistons dropped off this arvo. That should not take too long. Head is less than a week away. Double check CR. Going by my calculations a 1.2 mm headgasket will bring it to 8.5:1.

Crank and pistons dropped off this arvo. That should not take too long. Head is less than a week away. Double check CR. Going by my calculations a 1.2 mm headgasket will bring it to 8.5:1.

whats the deck height? Are you aiming for a tight squish for this motor?

Block hasn't been decked at all. Head has been decked 1.0 mm at NAPREC. We just have to get the head here and take some measurements. From what I can gather the chamber volume is 66.5cc but that's got to be double checked.

Block hasn't been decked at all. Head has been decked 1.0 mm at NAPREC. We just have to get the head here and take some measurements. From what I can gather the chamber volume is 66.5cc but that's got to be double checked.

Not sure if you have read my thread if not please do so as there is alot of info about squish and its advantages

Not sure if you have read my thread if not please do so as there is alot of info about squish and its advantages

I remember something about a 33 thou squish. How does this change when one of the pads have been removed?

I remember something about a 33 thou squish. How does this change when one of the pads have been removed?

i guess they have taken the intake squish pad out so you can still set the squish with the one pad all it means it will push the air and fuel towards the intake as this will be the cooler side of the chamber. If your looking at running big boost, this will help it from detonation

  • 2 weeks later...

Update here, doing it for Paul cause the pics were taken on my phone.

First is dropped all this stuff to Chris at Craved Coatings (look them up, really good work and very reasonable prices) for ceramic coating. This will be back in 2 weeks;

f0213956.jpg

Next we went to where Marcus had sent the head (Unigroup), this is the first time it's been seen and has only been in the country a few days.

Typical Marcus wrapping, it's bombproof!

Awesome that he left the flight stickers on - Marcus brought it back as carry on luggage on the plane haha!!!

8aeb44b9.jpg

f05186a8.jpg

25831932.jpg

530b1bd3.jpg

d0f55daa.jpg

868c07fe.jpg

22135093.jpg

c5777bb8.jpg

0855219a.jpg

487bac65.jpg

314708f2.jpg

5af15a5b.jpg

a08901d6.jpg

56a96575.jpg

0d13392d.jpg

35c14987.jpg

d6923662.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...