Jump to content
SAU Community

Recommended Posts

Ok, todays effort. Sammich plate in. We got the box off and back on only for that ring thing in the clutch come off. Box off, fix and back on.

Next issue. TOP STARTER MOTOR BOLT! ARGHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH! Some idiot decided to cable tie the new water line from the rear of the head in the worst position ever. After a few hours (and some brain juice), it's in.

Let's see how we go tomorrow night!

i actually take the alternator tensioner bracket off, flip down the alternator and use a socket and extension and go through the front now. Takes about 15 minutes longer but i loose alot less blood

How many extra bloody lines do you need!?!

I just spent some time this arvo ripping all the crap off the intake side of my 26. So much (crap) stuff...

Be nice if it was less packed!

How many extra bloody lines do you need!?!

I just spent some time this arvo ripping all the crap off the intake side of my 26. So much (crap) stuff...

Be nice if it was less packed!

deleted heat exchanger (because it was contaminated with oil pump gears haha) and HKS put in a fitting from the back of the head for water to go to the top radiator hose housing. That's the prick that caused us issues

any progress ? or just waiting for dyno time

won't be long now. The car is at Unigroup at three moment. A few things to do and onto the rollers. With any luck by weeks end (Can only hope).

Any suggestions for oil type and brand to use for the run in?

  • Like 1

won't be long now. The car is at Unigroup at three moment. A few things to do and onto the rollers. With any luck by weeks end (Can only hope).

Any suggestions for oil type and brand to use for the run in?

Few things to do my ass.

Lol. I was at unigroup and saw what you brought there!!!!

PS: your front cam cover looks great!! :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...