Jump to content
SAU Community

Piglet's Rebuild Of His Busted Tomei 2.8

Piggaz
 Share

Recommended Posts

Piggaz Grand Master

Piggaz

Posted
  • Author
Posted

Your engine sounds very similar to what mine is ( capacity & your intended power level ).

I wasn't entertaining the use of 280's or 290's...but was thinking something along the lines of a 10.5 & 268 , since one of my old JUN's is now damaged.

You have now chucked a curve ball at me in regards to the cams I will go with ..so I eagerly await a proper figure once sorted from your test mule . :D

And I will be keeping the factory air box , but using a large carbon duct to the bottom of it that came off Geoff fear's gtr .

Keen to see photo's of that duct. Thats interesting!

I had a set of JUN 264's at 10.5 but we ran them up and wanted something that more more aggresive on the ramp rates.

Very strong paul, congrats thus far...once sorted, its time to enjoy that car and get it out of the workshop :) rowing gears looool

So this setup will be dedicated for e85 only?

Rowing gears.... w0000!

Nah man. Ethanol Content Sensor. Put whatever the hell I want in and the ECU will adjust it to suit! Vipec can do this too ;)

  • Replies 3.8k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Piggaz
Piggaz

Car is finally booked into Insight on the 19th of April for the ECU, fuel system and sensor wire in plus the tune. Thats the good news. The bad news is that V-cam aint gonna fit with my pistons and ho

Piggaz
Piggaz

Small update.... ITS RUNNING. Fired first go! Smells like burnt dust apparently .

Piggaz
Piggaz

A 9174 would just make the EGP pressure issue worse and in my mind it seems like a bit of a GT RS shit going on. Not that it's horrendously bad (It wouldn't be no twin buttplug pressures), That's NOT

Posted Images

Piggaz Grand Master

Piggaz

Posted
  • Author
Posted

That duct is a 32 thing, I have one on mine, it cups the hole in the front bar and turns up under the air box, haven't seen one for the 33 or 34 yet

All that power and through a paper filter, freakin awesome, got a graph

Ahh, take a pic and MMS it to me tomorrow?

Yep. $10 paper filter. Pods and exxy jap filters can suck a big one! no graph yet. My phone ran out of charge while I was there. Looks pretty fat!

GTR_JOEY Grand Master

GTR_JOEY

Posted
Posted

Mad stuff. That black box is freaky!!

Guy plugged it into my 34 along with MAP hose to ECU and started and run after a minute configuring inputs etc on his laptop.

Then Paul made my engine suck a rag.......eh Paul :no:

Bahaha then he stands there while Sean pulls off the defused and cooler piping...

The old rag eater ;)

Piggaz Grand Master

Piggaz

Posted
  • Author
Posted

Also, you need clear indicators ;)

Im undecided on them. Definately need the S3 Lower lip though. S1 looks homo!!!

and shut your bonnet and take a photo on a sunny day :O

she looks nice mate. But black TE37's wheels look nicer IMO.

Haha. "storm trooper" look? I agree. Black on white looks mad!

Once I get it back i'll spend a few days polishing it and take some half decent photo's. Errr, what a shit job that is!

33GTRV Mentor

33GTRV

Posted
Posted

well, paul is quiet the phag, and he was discussing with his tuner on colour coding his aqua full motec header and exhaust and accesorising with hot pink rins and green wheel nuts. He seems to think it will bring all the boys to the yard, for what purpose i do not wish to know...

Mick_o Grand Master

Mick_o

Posted
Posted

well, paul is quiet the phag, and he was discussing with his tuner on colour coding his aqua full motec header and exhaust and accesorising with hot pink rins and green wheel nuts. He seems to think it will bring all the boys to the yard, for what purpose i do not wish to know...

Well I'm sure he could teach you but he'd have to charge lol

Piggaz Grand Master

Piggaz

Posted
  • Author
Posted

well, paul is quiet the phag, and he was discussing with his tuner on colour coding his aqua full motec header and exhaust and accesorising with hot pink rins and green wheel nuts. He seems to think it will bring all the boys to the yard, for what purpose i do not wish to know...

pink_bear0.jpg

I was thinking these! Thoughts?

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...