Jump to content
SAU Community

Recommended Posts

wow! looks like a gain of 50kw @ 4krpm!

must be happy & must be hanging to drive it

so with the gtrs's u were making 200kw @ 4krpm & now you are making ~340kw with -5s & latest setup :)

what is the difference in the run with the blue line v's the brown line (in the 1st graph) or is it just 2 runs where you were trying to diagnose the miss?

Yeah man.... We pumped more boost into it to see if it did it... which it did.

It'll be nice to have 350 at 4000 RPM. I'm sure with a bit of fiddling we will get there :D

i wonder how your numbers would compare to a larger capacity v8 (i.e. 6.2ltr, ls3) which makes the same peak power...would be interesting to see if your 2.8ltr makes more power & torque @ 4krpm

Im waiting on your final figures dammit ...so i can copy the specs ;)

You may want to get the more aggresive ones :P. Your turbos are slightly bigger also.... Bump up that comp ratio!!!!

i wonder how your numbers would compare to a larger capacity v8 (i.e. 6.2ltr, ls3) which makes the same peak power...would be interesting to see if your 2.8ltr makes more power & torque @ 4krpm

I wonder that also. Considering a current "HSV" commo makes what, 325 KW at the flywheel at its peak? (Correct me if i'm wrong). I'm sure in the lower part of the rev range (1000 - 3000 RPM) the V8 would feel more grunty.... after that.... who knows.

Lets see if you can match my old typhoon of 1,000nm at the treads :) and i wouldn't worry about the hsv v8 I'd be trying to match/beat the new ford one! I havent driven one but all I keep getting told is that they are insane

Lets see if you can match my old typhoon of 1,000nm at the treads :) and i wouldn't worry about the hsv v8 I'd be trying to match/beat the new ford one! I havent driven one but all I keep getting told is that they are insane

Lol. But I'm only 2.8 without a 3 metre stroke length!!!

They left it at 30psi, a good even number :)

Video doesn't do it justice. It is the cleanest 33 GTR I have ever seen. Everything about the car is immaculate, you could eat your dinner off the engine lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...