Jump to content
SAU Community

Recommended Posts

972FDE76-81E2-40D4-9009-FED29B987CB8-174

That was our 9th or 10th run. Called it a night. To hold 25 psi up top we need to give it 29 ish early. Cams are set to 0 - 0 still. They will have a filddle next week.

With the controller off (20ish PSI) it made 441 RWKW. I got my goal of 400RWKW @ 5000 RPM which is awsome. AHhhh let me drive it!!!!!

  • Like 2

Great results ...Now max those snails out , i wanna see 500 kw :P

They have nothing left. Thats it. If I could run more I would :(. Could fiddle with cam timing but i want that bulldog midrange!

They have nothing left. Thats it. If I could run more I would :(. Could fiddle with cam timing but i want that bulldog midrange!

I know 29 psi would be maxing them out , shame it drops off a little though.. Im just shit stirring .

Congrats on the awesome figures ..could still squeeze a few more with some timing , but those are killer numbers.

It should be real fun to drive ..And now i know which cams to get too :thumbsup:

Edited by ezy_09s

massive power & being low mounts would put those arguments to rest :)

great result - congrats paul

i never expected this level of power, just goes to show the results you have yielded comes down to a great setup & as u said before, all these small percentages here & there = big numbers!!!

Well done Paul. Awesome to these numbers especially so early in the revs.

What turbo actuators are you running?

Standard Garrett item's that have been tricked up by Racepace. I have backed them off to 20 PSI.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...