Jump to content
SAU Community

Recommended Posts

7 minutes ago, ActionDan said:

But.. how can we agree on something? I run a Haltech that fits into my kick panel. 

#theshame

No Peter loves living dangerously like you and runs a haltech without a crank trigger.

2 minutes ago, ActionDan said:

You should get Emtron, it will double your power instantly.

Don't be silly, you know that any ECU can make power, its how it behaves everyday and weather it delivers on the features it's marketed with.

 

Anyway looks like Piggaz cheaped out and bought a knock off Motec m150.... 

 

M150.thumb.jpg.db4a8e5d001f3ce14e0d0c42aad2d99a.jpg

So somehow the ECU is the issue, not the old CAS, and moving to a superior crank trigger setup is the fix, but we blame the ECU?

Sounds backwards?

Wait? I've got it! Its because the signal has to travel through so many boxes and so many wires!

Just now, ActionDan said:

So somehow the ECU is the issue, not the old CAS, and moving to a superior crank trigger setup is the fix, but we blame the ECU?

Sounds backwards?

Wait? I've got it! Its because the signal has to travel through so many boxes and so many wires!

See now you are starting to get it...

 

The old powerFC, Nistune and adaptronic don't suffer from issues... unless of course the loom is cooked or the CAS is actually faulty..

See now you are starting to get it...
 
The old powerFC, Nistune and adaptronic don't suffer from issues... unless of course the loom is cooked or the CAS is actually faulty..

I bet all cases of timing related issue are definitely tested properly as being the ECU for sure.

So how much better does your car run since switching?
1 minute ago, ActionDan said:


I bet all cases of timing related issue are definitely tested properly as being the ECU for sure.

So how much better does your car run since switching?

They are actually, but let's not get the facts in the way of things. As long as you are happy with your car that's all that matters!

4 minutes ago, ActionDan said:


I bet all cases of timing related issue are definitely tested properly as being the ECU for sure.

So how much better does your car run since switching?

Lol if your in vic go for a drive in Andrews car

next day you will rip out haltech and put a power fc in and have a retune with the bloke who sorts his car

100% garentee that

 

2 hours ago, ActionDan said:

How much better is your car to drive now you've switched from Haltech to Emtron anyway, must have been a massive improvement? 

Bit weird Mick, you thought the Haltech was decent a few months ago? What happened? 

"Hey guys up for grabs is a Haltech elite 2500 with a patch loom by haltech to suit an R34 GTR. ECU has only been in the car for around 10000km max im sure anybody shopping around knows the capabilities of this top of the line ECU. $2800ono"

I guess top of line doesn't actually mean it's any good I suppose. Soi I reckon the improvement must be massive and dyno proven with no other changes to skew results... 

 

Lol i sold that POS on behalf of a friend. I never thought it was good as it never remembered the tune properly mate.

Sadly that wasn't a bad thing because the tune was as bad as the ECU ?

I wasn't going to offer my ACTUAL opinion on that when i was trying to sell it haha ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...