Jump to content
SAU Community

Recommended Posts

ported stock manifold $800... 6boost $1200.. i know which one i would go.

Personally i would not do it as the stock ones are prone to cracking but Stealth is a major drawcard for power porting though.

Will be good to see the results either way.

Even better to see you got the guys to sort out your car Tyson.

  • Replies 87
  • Created
  • Last Reply

Top Posters In This Topic

Personally i would not do it as the stock ones are prone to cracking but Stealth is a major drawcard for power porting though.

Will be good to see the results either way.

Even better to see you got the guys to sort out your car Tyson.

Hey trent. Already got it done! Results are on 1st page. Thoughts?

Me thinks you go back to Status and it'll make the same power.

Happy to run it up one day for free, i remmeber we did one or two runs to check it over for Tyson but i thought it was closer to 290, will check tommorrow.

Found it, made 292 so 10rwkw more than avo dyno.

Happy to run it up one day for free, i remmeber we did one or two runs to check it over for Tyson but i thought it was closer to 290, will check tommorrow.

Found it, made 292 so 10rwkw more than avo dyno.

Where the hell I pull 300 from? son of rajab. Lol. But interesting it only pulled 247 or something on jjm. Now pulls another 25rwkw. Better power across the range

R31nismoid is implying that jjm fudged my results just to fake a gain. Not sure why he feels that way. Perhaps he has been to jjm before and they did that to him.. no clue.

But I trust these guys. They've done right by me so far.

Me thinks results are genuine.

50% gain in flow is nice just pray for no cracks.

Have you had the manifold independantly flow tested?

Those gains in flow seem huge

Im thinking the power gains are real, but im not so sure about the 50% increase in flow

If you think about it 50 cfm to 100cfm is 100% gain. So 160cfm tested on a flow bench to 240cfm is only a gain of 80cfm. 50‰ sounds huge. But the starting number wasn't the highest to begin with as the stock Mani flows like crap.

This is a reputable mob so I can only assume he's not speaking crap. Jjm would tear him a new one if the numbers were fudged. They've been dealing with this guy for years.

Where the hell I pull 300 from? son of rajab. Lol. But interesting it only pulled 247 or something on jjm. Now pulls another 25rwkw. Better power across the range

R31nismoid is implying that jjm fudged my results just to fake a gain. Not sure why he feels that way. Perhaps he has been to jjm before and they did that to him.. no clue.

But I trust these guys. They've done right by me so far.

Me thinks results are genuine.

50% gain in flow is nice just pray for no cracks.

yeah 50% gain sounds fantastic, offer stands if you want an independent run... keeps the roller vs hub haters at bay :P

yeah 50% gain sounds fantastic, offer stands if you want an independent run... keeps the roller vs hub haters at bay :P

Lol. Might be worth it just for giggles. U still in same place?

to answer ur question about diff between 2 - 1.5.. 2 way lockes on both accel and decel whereas 1.5 is more for accel only

2 ways chatter/jolt a little bit as well, i like it but it sounds like u broke a shaft or something especially in car parks trying to drive around.

Nah new shop is nearly finished.

429517_3152457364010_1042410610_33058136_1201205526_n.jpg

Now no more complaints from neighbours hey?

to answer ur question about diff between 2 - 1.5.. 2 way lockes on both accel and decel whereas 1.5 is more for accel only

2 ways chatter/jolt a little bit as well, i like it but it sounds like u broke a shaft or something especially in car parks trying to drive around.

Yeah I knew the basics. But thanks for info on how bad the chatter could be. 1.5 might be the go.

Edited by ShiftyTys

sorry trent i meant id rather go 6boost over spending $800 on stock manifold.

Ive been down the modifying stock manifold + 50mm gate addon yrs ago and prefer my highmount setup anyday of the week.

but each 2 there own.

sorry trent i meant id rather go 6boost over spending $800 on stock manifold.

Ive been down the modifying stock manifold + 50mm gate addon yrs ago and prefer my highmount setup anyday of the week.

but each 2 there own.

what was the biggest thing you noticed

R31nismoid is implying that jjm fudged my results just to fake a gain. Not sure why he feels that way. Perhaps he has been to jjm before and they did that to him.. no clue.

No I wasn't. I think Trent gets where I was going - so if he is offering another run - take it and post the results.

Remember - you also 'trusted' AVO. :thumbsup:

No I wasn't. I think Trent gets where I was going - so if he is offering another run - take it and post the results.

Remember - you also 'trusted' AVO. :thumbsup:

They are the same people. Name change. Jjm are avo. So I still trust them.

Car made initially:

285rwkw @ Avo turboworld

250rwkw @ jjm turboworld.

35rwkw variance from the same place then with no changes to setup. Not very consistent. Hence take it to Trent - it's being offered for free

35rwkw variance from the same place then with no changes to setup. Not very consistent. Hence take it to Trent - it's being offered for free

The owner and the name and the dyno of avo are no more. Avo is now just selling avo branded parts. The tuner mechanics etc got their own dyno and.are now jjm.

So 35rwkw on 2 different dynos is easy done.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...