Jump to content
SAU Community

Recommended Posts

ported stock manifold $800... 6boost $1200.. i know which one i would go.

Personally i would not do it as the stock ones are prone to cracking but Stealth is a major drawcard for power porting though.

Will be good to see the results either way.

Even better to see you got the guys to sort out your car Tyson.

  • Replies 87
  • Created
  • Last Reply

Top Posters In This Topic

Personally i would not do it as the stock ones are prone to cracking but Stealth is a major drawcard for power porting though.

Will be good to see the results either way.

Even better to see you got the guys to sort out your car Tyson.

Hey trent. Already got it done! Results are on 1st page. Thoughts?

Me thinks you go back to Status and it'll make the same power.

Happy to run it up one day for free, i remmeber we did one or two runs to check it over for Tyson but i thought it was closer to 290, will check tommorrow.

Found it, made 292 so 10rwkw more than avo dyno.

Happy to run it up one day for free, i remmeber we did one or two runs to check it over for Tyson but i thought it was closer to 290, will check tommorrow.

Found it, made 292 so 10rwkw more than avo dyno.

Where the hell I pull 300 from? son of rajab. Lol. But interesting it only pulled 247 or something on jjm. Now pulls another 25rwkw. Better power across the range

R31nismoid is implying that jjm fudged my results just to fake a gain. Not sure why he feels that way. Perhaps he has been to jjm before and they did that to him.. no clue.

But I trust these guys. They've done right by me so far.

Me thinks results are genuine.

50% gain in flow is nice just pray for no cracks.

Have you had the manifold independantly flow tested?

Those gains in flow seem huge

Im thinking the power gains are real, but im not so sure about the 50% increase in flow

If you think about it 50 cfm to 100cfm is 100% gain. So 160cfm tested on a flow bench to 240cfm is only a gain of 80cfm. 50‰ sounds huge. But the starting number wasn't the highest to begin with as the stock Mani flows like crap.

This is a reputable mob so I can only assume he's not speaking crap. Jjm would tear him a new one if the numbers were fudged. They've been dealing with this guy for years.

Where the hell I pull 300 from? son of rajab. Lol. But interesting it only pulled 247 or something on jjm. Now pulls another 25rwkw. Better power across the range

R31nismoid is implying that jjm fudged my results just to fake a gain. Not sure why he feels that way. Perhaps he has been to jjm before and they did that to him.. no clue.

But I trust these guys. They've done right by me so far.

Me thinks results are genuine.

50% gain in flow is nice just pray for no cracks.

yeah 50% gain sounds fantastic, offer stands if you want an independent run... keeps the roller vs hub haters at bay :P

yeah 50% gain sounds fantastic, offer stands if you want an independent run... keeps the roller vs hub haters at bay :P

Lol. Might be worth it just for giggles. U still in same place?

to answer ur question about diff between 2 - 1.5.. 2 way lockes on both accel and decel whereas 1.5 is more for accel only

2 ways chatter/jolt a little bit as well, i like it but it sounds like u broke a shaft or something especially in car parks trying to drive around.

Nah new shop is nearly finished.

429517_3152457364010_1042410610_33058136_1201205526_n.jpg

Now no more complaints from neighbours hey?

to answer ur question about diff between 2 - 1.5.. 2 way lockes on both accel and decel whereas 1.5 is more for accel only

2 ways chatter/jolt a little bit as well, i like it but it sounds like u broke a shaft or something especially in car parks trying to drive around.

Yeah I knew the basics. But thanks for info on how bad the chatter could be. 1.5 might be the go.

Edited by ShiftyTys

sorry trent i meant id rather go 6boost over spending $800 on stock manifold.

Ive been down the modifying stock manifold + 50mm gate addon yrs ago and prefer my highmount setup anyday of the week.

but each 2 there own.

sorry trent i meant id rather go 6boost over spending $800 on stock manifold.

Ive been down the modifying stock manifold + 50mm gate addon yrs ago and prefer my highmount setup anyday of the week.

but each 2 there own.

what was the biggest thing you noticed

R31nismoid is implying that jjm fudged my results just to fake a gain. Not sure why he feels that way. Perhaps he has been to jjm before and they did that to him.. no clue.

No I wasn't. I think Trent gets where I was going - so if he is offering another run - take it and post the results.

Remember - you also 'trusted' AVO. :thumbsup:

No I wasn't. I think Trent gets where I was going - so if he is offering another run - take it and post the results.

Remember - you also 'trusted' AVO. :thumbsup:

They are the same people. Name change. Jjm are avo. So I still trust them.

Car made initially:

285rwkw @ Avo turboworld

250rwkw @ jjm turboworld.

35rwkw variance from the same place then with no changes to setup. Not very consistent. Hence take it to Trent - it's being offered for free

35rwkw variance from the same place then with no changes to setup. Not very consistent. Hence take it to Trent - it's being offered for free

The owner and the name and the dyno of avo are no more. Avo is now just selling avo branded parts. The tuner mechanics etc got their own dyno and.are now jjm.

So 35rwkw on 2 different dynos is easy done.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...