Jump to content
SAU Community

Godzilla Motorsport R35 Gtr Drag Car

GodzillaMotorsport
 Share

Recommended Posts

GodzillaMotorsport Enthusiast

GodzillaMotorsport

Posted
Posted

We have finally finished the new R35 gtr drag car ..was dynoed last week to 30 psi with the new godzilla spec 3.2ltr rb setup with a precision pro mod 94mm turbo .

running a vipec v88 ecu , m&w cdi ignition , motec adl3 dash , 12 xp2000 cc injector , aeromotive fuel pump & reg , 5speed lenco cs4 trans , ace 7.6 tripple plate

clutch , pwr radiator and intercooler , 6 boost custom manifold , precision turbo 66mm gate

testing and licencing next week then debut event will be the nitro champs in syd early next month ..

check out our facebook page .. godzilla motorsport

we are also devoloping the vr38 engine as we speak for later in the year , 2000hp plus .. we will be the fastest r35 gtr on the planet... aussie design and built ..

cheers, mark godzilla motorsport

Lithium Grand Master

Lithium

Posted
Posted

Totally love it man, that sounds mental and really glad you're going to give it a crack with an RB initially - would love to see some solid 6s passes from one :)

Are AMS going to be working with you on the VR38 build? When that thing goes in, I think the 2JZ crowd will have reason to worry!

GodzillaMotorsport Enthusiast

GodzillaMotorsport

Posted
  • Author
Posted

We are doing our own vr38 development .

I contacted ams but no reply .

We did one pass on we'd at wsid to 1/2 track on 30 psi . Went 1.15 60ft 4.9 at 145 to 1/2 track 8.00 et ..on a 10.5 w slick

Love the car ready now to wind some power in

All setup for Saturday at wsid nitro champs event .

Cheers mark

Lithium Grand Master

Lithium

Posted
Posted

Lol awesome, .3 off the GTRs best time ever running "only" 30psi and rolling through the end traps?

Looking forward to hearing how it goes this weekend, good luck - now the fun begins! Be pretty sweet if after some seat time this ends up going snugly into the 6s

GodzillaMotorsport Enthusiast

GodzillaMotorsport

Posted
  • Author
Posted

We had 2 runs today .

First pass was all good till top of 3rd gear when a cdi died .. Borrowed One of gas Motorsport .

We rushed to get it ready for next round and didn't refresh the clutch ..

Then ran a 7.3 at 181 mph with the shift light on the entire run ..

overall very happy first time in car

Thanks to my crew

Cheers mark

Cheers mark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      It's needed for rolling idle up, and I think it is a decider on VCT also.
    • Kinkstaah
      ECU sees many times the speed than speedo does (R34 swap)

      By Kinkstaah · Posted

      I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...