Jump to content
SAU Community

Recommended Posts

Hey guys,

Quick question as no clutch shop will give me a straight answer...

Im after a new clutch for my R34 GT-T, Currently modded with FMIC, BOV, Pod filter, full 3' exhaust, and my Shiney new eboost street :D.

Im looking to get it tuned as soon as i have the clutch installed with a nistune, First Question is Which clutch do i buy?? all shops ive been to say what is the torque of your car, Problem being, i dont know untill i get a tune, and i cant get a tune till i have a clutch!

2nd question, Before the tune, Are there any other supporting mods i should look into as to make the tune more economical/beneficial? ive heard Z32, Fuel pump, Coil packs. But not sure what can be overlooked and installed later, or what needs to be installed for the tune.

Any advice or opinions greatly appreciated, Cheers guys!

Edited by EuphXP
Link to comment
https://www.sau.com.au/forums/topic/398503-which-clutch-s/
Share on other sites

I am running an Exedy cushioned button clutch, happy with the way it drives and feels....price was a bit of a kick in the teeth though.....

Cant remember what they are rated too, i think it was a tad over 300kw so it should be more than enough for your needs...

Link to comment
https://www.sau.com.au/forums/topic/398503-which-clutch-s/#findComment-6328715
Share on other sites

In regards to which clutch you should buy it is basically a question of do you have any future plans for more power or what is your future power goal and get a clutch to suit that. But with the setup listed something like a heavy duty exedy clutch for a few 100 will be more than enough. For the other mods youve listed coilpacks only need to be done if your ones are stuffed and z32 wouldnt really be needed until you probably do your turbo and start pushing more power where your stock afm is at its limits but the fuel pump would be worth replacing if you want to do it for piece of mind but again for that setup you listed not essential.

Link to comment
https://www.sau.com.au/forums/topic/398503-which-clutch-s/#findComment-6328719
Share on other sites

Wasnt looking to spend an arm and a leg, and as for future mods, im only aiming for ~250awkw for the time being,

Ive got 2k set aside for my clutch installed, and have been quoted for the nistune installed and tuned for $1100.

Was just going to use my local mechanic for the clutch install, just need to know which clutch to throw in it...

Ive had a look at the exedy clutch kits, as with the NPC Kits and was quoted for a heavy duty organic clutch kit. $753.50. My mechanic said he would rather work with exedy as he has contacts.

If i was to go exedy, which clutch kit do i go? Heavy duty? Button? Ceramic?

And as for the flywheel, ive heard with ceramic clutches its best to get a new flywheel to improve the life of the clutch, ive also heard that theres no need to do flywheel >.<

Link to comment
https://www.sau.com.au/forums/topic/398503-which-clutch-s/#findComment-6328787
Share on other sites

you should never put a lightweight flywheel in a street car... totally goes against anything streetable

it's come with the clutch. this one-> http://www.nismo.co.jp/en/products/competition/clutch/sckit.html

so npc organic clutch will be better than this one for street use?

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/398503-which-clutch-s/#findComment-6329664
Share on other sites

Npc also do a 10" organic clutch which is rated to 280 rwkw. Jap__star on here has one and pushing 300 rwkw. Very driveable and would be perfect for a street car.

We regularly put these in cars making 300rwkw without issues. They can hold a lot more torque than we give them credit for and being a pull type clutch, they will hold more torque than their push type counterpart.

would the carbotic 10" handle 325rwkw...?

We've tested them to 600rwhp, drag racing 9k GTR launches, track work for years. They will eventually wear out if abused or not driven correctly. It's usually the latter that gets most people on their first button clutch

which one is better for street use?

nismo clutch kit(the basic one with lightweight fly wheel that one) or npc organic clutch?

I would highly recommend the NPC Organic 10". Have fitted them to many cars. Get nothing but rave reviews from each person every time. Be careful over 400hp though, we don't often push them harder than that so how far they will go is still relatively unknown

Link to comment
https://www.sau.com.au/forums/topic/398503-which-clutch-s/#findComment-6329751
Share on other sites

I have had both a Organic NPC and a Bigmouth track NPC button.

The organic is better for every day use, I was pushing 450hp when my GTR was my daily and not an issue what so ever until of course wear took place. I was doing 6500-7000rpm launches getting my 1/4mile time down to a 12.385 at 111mph when I decided the clutch had enough it was slipping at the top end of my gears mainly second and 3rd.

I asked MANY MANY suggestions on which way to go after killing the organic. Dan(ERD), Noel(Fineline), Strik3r, Hyped6 and Strudel.

A majority suggested the Bigmouth track, and I am glad I listened to them. The clutch is a little adsertive and obviously doesn't like being ridden like a button clutch shouldn't be, but in traffic somewhat difficult to avoid. but 1 of the best things I had in my GTR. Not as piggy as some of the button clutches I have driven and VERY liveable.

My clutch is still holding out and I don't expect having to upgrade for a long long time, so It's my recomendation.

Link to comment
https://www.sau.com.au/forums/topic/398503-which-clutch-s/#findComment-6330070
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
    • Regardless of neglect or incompetence, fixing either is tedious and annoying. Most of the neglect on my car is definitely rust. I hope I can at least pass inspections later on and they won't fail the car due to slightly corroded hardlines. I was generous with rust converter and wax and it looks ok, most lines in the rear are hard to see properly anyways.  Definitely will test them though to make sure they don't rupture under pressure, in that case the car isn't going anywhere this year.
×
×
  • Create New...