Jump to content
SAU Community

Recommended Posts

Indeed, there are still some v710 new I think, but most are now v70a.

they are among the quicker tyres, especially on a lighter car. they were very popular when they were the IPRA control tyre about 10 years ago before they moved to the super expensive yokos. they performed better when buffed but I guess you don't want to bother.

one thing I found with v70A which may also be true in v710, high tyre pressures gave the best performance under the gtr. when I say high, I mean 42-44 hot which is outrageous

take them if the price is right

Link to comment
https://www.sau.com.au/forums/topic/398635-kumho-v710/#findComment-6332061
Share on other sites

Clinton has a set of these for the Mazda and they make it handle so much better than an old car like that is entitled to. The biggest issue he had was finding the right tyre pressure to match the light weight of the car as they seem to be pressure sensitive.

Link to comment
https://www.sau.com.au/forums/topic/398635-kumho-v710/#findComment-6332332
Share on other sites

Both V710 and V70A are current tyres from memory.

I have not run these but Mark has run these on the S13 with very good success. They do like higher temps compared to most semis, 36-38psi (although these are not generally considered a semi, not a cams approved semi anyway). Mark estimated an improvement of 1.5-2 sec's a lap at EC and probably half that at Wakefield as compared to a similar sized V70A. Better braking, traction and cornering - which is expected when you look at the tread pattern. Longevity was also very good as he campaigned a set for almost 7 rounds! Other competitors say they are equivalent to an A050 medium or soft compound. For the price I don't think you can go wrong.

Link to comment
https://www.sau.com.au/forums/topic/398635-kumho-v710/#findComment-6332377
Share on other sites

price has a lot to do with it as the AO50's or Hankooks are 2000 to 2500 vs these which are 1100. I tried to run these in the SAU Nats without much luck and you will have to run as a slick tyre in supersprints.

Different subject with CASM but i think they need to look at the rules as there is a smaller difference between a semi slick and slick tyre now.

Link to comment
https://www.sau.com.au/forums/topic/398635-kumho-v710/#findComment-6332842
Share on other sites

with AASA - superTT and MX5 classes its run what you brought, Im up against blokes on slicks and semi's so yeah, these would be good!

for 219 a corner I think i'll give them a shot, although wont be running them till July at the earliest.

If I can go half a second quicker (vs r888) at wakie i'll be happy, that'll take me well into the mid to high 1.12's (shut up you sub 1.10 people! i have 75rwkw!) and would actually be competitive in superTT in a 10 lapper

Link to comment
https://www.sau.com.au/forums/topic/398635-kumho-v710/#findComment-6333162
Share on other sites

V710's are awesome. Best bang for buck and at just over $1000 even better value.

DO IT!

You won't regret it. I actually got 9 supersprint events out of 1 set. Only on the 9th event did the lap times drop off.

They still have life in them, just not as fast anymore.

On your light MX5 they will transform the car and you may get more life out of them.

Also against full slicks, they heat up quicker and you go faster sooner. Good for 5 laps but they can over heat if punished for longer.

Just remember they are designed as a autocross/sprint tyre.

Link to comment
https://www.sau.com.au/forums/topic/398635-kumho-v710/#findComment-6333338
Share on other sites

A mate uses them on his S14 track car, 300-350rwkw or so - said they take a little more pressure hot than the O50 to perform well, reckons they are as good if not faster than the O50.

Then factor in the money side of it & they are good value when you considering the price of the others is almost double in some cases. You'd certainly think you could get .5 of a sec off going to them from R888s

Down here it's hit & miss if they will let you out with them in the wet, no idea what it'll be like for you guys up there as it seems to vary a bit between states/organisers. Be fairly certain if it was wet and at a CAMS event, no chance haha.

Link to comment
https://www.sau.com.au/forums/topic/398635-kumho-v710/#findComment-6333634
Share on other sites

Brother has been using the v70A on the PRB Clubman for quite a few years now and very happy with them setting some great records 1:38 at the creek and 1:02 at Wakfeild. Winter time at Wakfeild Park a lighter car eg: clubmans and Lotus Elise can run the soft compounds if the budget can afford to have a spare set.

Jason Wright used the V710's on his WRX at one stage and dont think he went quicker that the V70A i would look at them for a MX5

Link to comment
https://www.sau.com.au/forums/topic/398635-kumho-v710/#findComment-6333765
Share on other sites

hmm..race formats are 6 laps 1st race, 8 laps race 2 and race is a ten lapper.

food for thought! thanks lads!

and yes, a wet track is something id have to consider as I dont have spare rims to have other semi slicks on. doh

Link to comment
https://www.sau.com.au/forums/topic/398635-kumho-v710/#findComment-6333839
Share on other sites

On the MX5 I reckon you would be able to do 10 quick laps with the V710's.

I was worried about running the V710 on a wet track also, but luckily last year I didn't get a wet event all year.

You could alway bolt on a set of street tyres if it rains.

Link to comment
https://www.sau.com.au/forums/topic/398635-kumho-v710/#findComment-6336212
Share on other sites

they're not road legal, just like all the other 2 groove "cheater slicks" from Hoosier and Hankook.

I bought my Kumho slicks when they were on special on FSport. They were a few years old. I suspect all their specials are older stock they want to move.

My "cheap" set of slicks cost me a front gaurd, front bar and a wheel repair and only completed 2 sprint before the blowouts started. They turned out to be the most expensive set of tyres I'd ever owned.

I had 2 blowouts and a delamination and have seen the exact same thing happen to others using Kumho semis and slicks. It doesn't happen to everyone who uses them, but I don't recommend Kumhos to anyone. Well, apart from the KU36 which copped a heap of abuse from my heavyweight Supra, but I wouldn't touch their semis or slicks ever again. Spend a bit more and get something that doesn't have the blowout question mark hanging over its head. Its not alot of fun when a tyre blows out as you turn in to a corner fully committed to it!

Edited by hrd-hr30
Link to comment
https://www.sau.com.au/forums/topic/398635-kumho-v710/#findComment-6337833
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...