Jump to content
SAU Community

Recommended Posts

when im driving sometimes, no matter what gear im in, the turbo will spool but the engine wont go anywhere, then seconds later it will realise and continue like normal, i usually have to take my foot off the accelerator and put it back on for it to stop, so when im doing 50ks then go to 3rd, and acceletrate it wont go anywhere till i take my foot offf and put it back on.

any ideas?

Link to comment
https://www.sau.com.au/forums/topic/399470-a-flat-spot-in-r33-turbo/
Share on other sites

I was thinking it can't be that because it happens after I chuck it in gear and it happens if I just drive in the same gear and not change it...

These words still make it sound like its clutch slip. Where is the friction point on the clutch? High up the top?

ive since discovered, **sometimes** when i put my foot on the clutch as im coming to a stop the car will act like its conking out (engine light comes on, hicas comes on, revs go to 0) then when i take my foot off, the lights go away and the engine goes back to how it was? is that a transmission problem?

ive since discovered, **sometimes** when i put my foot on the clutch as im coming to a stop the car will act like its conking out (engine light comes on, hicas comes on, revs go to 0) then when i take my foot off, the lights go away and the engine goes back to how it was? is that a transmission problem?

Atmo BOV?

Does that happen in neutral or only when in gear?

If only in gear then the clutch is buggered and its not disengaging correctly

Need some more info. If u keep it in gear with the clutch in does it try and stall or only when u are slowing?

89cal may be right about the bov but need more info

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...