Jump to content
SAU Community

Recommended Posts

Skyline parts:

R33 gts-t airbox with enlarged cai/snorkel (used heat gun to reduce restrictions in snorkel). Brand new airfilter.

$100 ono

R34 Smic supported 210rwkw $50

R33 radiator flushed $50

R33 Bov no leaks $50

R33 side indicators $25

Pm for details

post-88652-0-10388700-1404817357_thumb.jpg

post-88652-0-74499400-1404817371_thumb.jpg

post-88652-0-11542900-1404817392_thumb.jpg

Would do you a special deal when the time comes to it if you pull them out yourself and help me chuck some stock ones in :)

if the timing works out ok absolutely.

will depend on if I have the ecu fitted up

unless you already have some stock ones

Wouldn't work unfortunately because although it's a 32 ECU it has a 33 chip in it. You could just pull yours out and send it to nistune and they will install a 32 one for you :)

That's cool. Was just toying with the idea :thumbsup:

Yeah when I get back I'll start working on the R34 and taking the parts off the R33 to sell.

Parts that will be forsale

- nistune R32 ECU with rpm window switch (to work with R33)

- 555cc injectors

- z32 AFM

- splitfire coils

And some other bits :)

sell me your radiator shroud :)

I have stock ones but they have been just sitting out not wrapped in a bag or anything. We will see how things go :)

Are the standard ones in a rail already, or just loose?

Because I'm rubbish at removing/fitting side feeds lol

Selling the RB20DET from my 4 door.

Was auto and still has the flex plate on it. Comes with most things such as the turbo, computer, etc except it doesn't have a coil pack harness. It looks like the wiring loom might have had a piggy back but that was before I owned it. I think kms was around 220,000. I have a new turbo gasket for it as well.

Asking $900 ono. It is out of my car and ready go.

hey guys..

i have a heap of R33 parts from a series one, and some little bits from a series 2. it was time to clean out the garage.

there is a heap of stuff like interior carpet, sunroof version roof lining, front (drivers bent on back due to accident) and rear seats.

plus a whole bunch of other stuff.

post-52730-0-41365700-1405041787_thumb.jpg

also have 3 mags. good to bling up a trailor maybe.. or just for the rubber. (205/40/17)

post-52730-0-08446200-1405041798_thumb.jpg

make me a reasonable offer for something you want/need and we can go from there. 0402 94 55 46

cheers.

Edited by dazman

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...