Jump to content
SAU Community

Recommended Posts

R32 GTR cradle no hubs/brakes/diff or driveshafts. Has a HICAS lock bar and knuckles. $100

R32 GTR rear struts with king springs. One has damaged thread on top of the shock. $80

Still got the R32 GTR HKS Drag rear coilovers $300

FJ 720 do you still have the HICAS lock bar on the R32 rear cradle?

  • 2 weeks later...

K&N panel filter for RB26DETT part no. 33-2031-2. Used for approx. 20k. Includes new bottle of power kleen and almost new can of spray oil (only used once for initial light coat). $80 ono.

price drop $60

Walbro 400l fuel pump did less than 500km, come with wiring and new strainer $50

Rb30 fuel rail new with an6 and an8 fitting also to suit 14mm or 11mm injectors with adaptors all included $150

Rb25 candy blue rocker cover $250

Rb25 clear cam cover used still in good condition just needs a good clean $50

Rb25 head with stock cams stock valve spring etc but no valve seals or rocker covers $100

Rb30 head $100

Rb25 block with blown piston ring $100

Rb30 block $150

Rb25 S1 afm $50

Rb25 S1 Throttle body and throttle position sensor $60

Rb25 stock fuel rail with stock injectors $50

Rb25 injector loom $40

Wouldn't happen to have a decent condition rb30e harmonic balancer for r31 hanging around?

Walbro 400l fuel pump did less than 500km, come with wiring and new strainer $50

Rb30 fuel rail new with an6 and an8 fitting also to suit 14mm or 11mm injectors with adaptors all included $150

Rb25 candy blue rocker cover $250

Rb25 clear cam cover used still in good condition just needs a good clean $50

Rb25 head with stock cams stock valve spring etc but no valve seals or rocker covers $100

Rb30 head $100

Rb25 block with blown piston ring $100

Rb30 block $150

Rb25 S1 afm $50

Rb25 S1 Throttle body and throttle position sensor $60

Rb25 stock fuel rail with stock injectors $50

Rb25 injector loom $40

R31 RB30 harmonic balancer are normally single piece while VL RB30 harmonic balancer are two piece as Shiv pictured. However I have seen two piece on a R31 before.

The Rb30 engine i have came out of a R31

Can you post up a pick of the side of the thing, if I can see if it has ribbed belts or v-belts it will give me a better idea (my rb30 has ribbed)

post-72907-0-72546800-1454913682_thumb.jpg

post-72907-0-95061900-1454913743_thumb.jpg

Looks similar to mine except mine is a single piece (and, um, has a massive chunk missing out of it):

rb30e%20harmonic%20balancer.jpg[/url]

rb30e%20harmonic%20balancer2.jpg[/url]

Anyone know if these would be interchangeable?

The Rb30 engine i have came out of a R31

Edited by dorifticon

K&N panel filter for RB26DETT part no. 33-2031-2. Used for approx. 20k. Includes new bottle of power kleen and almost new can of spray oil (only used once for initial light coat). $80 ono.

bump make an offer guys
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...