Jump to content
SAU Community

Stock R33 Bov Noise Mods?

ClutchBurndout-:(
 Share

Recommended Posts

ClutchBurndout-:( Grand Master

ClutchBurndout-:(

Posted
Posted

hey guys, im keen on getting a bit of a bov pressure release sound, similar to what you get when you use a pod, but i would rather not put a pod in, so is there any DIY mods you can do to the stock bov to make the pressure release noise louder? theres people who do the old block off the bov mod, but i hate the flutter noise, not to mention the possible implications of disabling the bov.

cheers

Link to comment
https://www.sau.com.au/forums/topic/399978-stock-r33-bov-noise-mods/
Share on other sites
Hanaldo Grand Master

Hanaldo

Posted
Posted

Can get some gasket paper and cut it to the shape of the flange, then make the hole in the middle smaller than the actual hole. I did it in the hopes that it would shut mine up a bit, but it did the opposite and made it louder.

ClutchBurndout-:( Grand Master

ClutchBurndout-:(

Posted
  • Author
Posted (edited)

Can get some gasket paper and cut it to the shape of the flange, then make the hole in the middle smaller than the actual hole. I did it in the hopes that it would shut mine up a bit, but it did the opposite and made it louder.

wont gasket paper just blow into the recirc piping?

Edited by ClutchBurndout-:(
The Mafia Grand Master

The Mafia

Posted
Posted

Its not quite what you try to do, but loosely based on it so I'll paste it anyway.

I've actually got a copy and paste space where this is. Read on.

I love these threads.

You love the noise - and put the BOV on the car to be a wanker. Its scientifically proven that if you're a wanker, the first thing you do when you buy a Skyline is install a vent to atmosphere blow off valve, to advertise the fact that you are indeed, a wanker.

Do you even know how the Nissan air intake system works? There is an AFM that measures the air entering the engine. The Stock BOV recirculates FOR A REASON. When your duck whistle, twisty whooshy twirly, dick pulling, sparkly, spinny, shiny, noisy, fuleh sic, wank off valve opens, it dumps air that the engine has measured and allocated fuel for. When only half the air gets into the cylinder because the air it measured is at the street corner where you sped up erratically and backed off because you saw some women on the corner, thinking that when they heard your BOV they'd get naked and run and dive into your car, the engine is now overfueled and under oxygenated, and stalls, backfires, and carries on. You know why? Because you've created a MASSIVE AIRLEAK on a system that will not run with airleaks.

Do you like that fact that you will foul your plugs constantly?

Do you also like attracting the cops attention?

Do you like the risk of being defected and having to pay money for a BOV that didn't need to be there?

Do you like the fact that you are just making skylines more hated? (And don't worry, its almost a guarantee that you'll drive through the main street of town making it release "because you like the wank off sound")

Do you like it how women love the sound, get naked and dive into your car as you drive past?

Do you think SAU will be happy about another "My car is running rough, I only installed a duck whistle, twisty whooshy twirly, dick pulling, sparkly fuleh sic wank off valve" thread

They should create a database script that bans people that install BOVs "just for the sound" or complain when their car runs rough...

I'm was running 300rwkw and had the stock BOV.

Good luck with it though.

89CAL Grand Master

89CAL

Posted
Posted

[quote name=ClutchBurndout-:(' timestamp='1336902464' post='6354778]

ok

anyway, so what im gonna do is make the hole maybe 10mm, and i think ill be on the money as far as sound goes.

Why dont you just buy a Pod Filter? and if your worried about hot air or defects, buy a cold air box for it

Rather then spending 200 hours trying to Mod the standard BOV

  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
    • Duncan
      1992 R32 GT-R Race Car

      By Duncan · Posted

      heh, aint no R32 ever meeting modern targa cage rules unless the driver is veeeery short OP, good luck with the sale, since its already in the land of freedom I'm sure you will find a good buyer.
    • Duncan
      Oil pan for RB25DET NEO Stagea "version"

      By Duncan · Posted

      meh, it was a good video, clear about the issue and how he dealt with it. A bit heavy on the RTV and very brave to put an RB in anything without rebuilding it first, but otherwise I thought it was good Dose, I'm not sure that having the pickup forward is a big issue; yes of course the oil could shift under brakes but the sump should never be empty enough for that to be a problem (unless you also have a higher volume oil pump, and that oil can't return from the head to the sump quickly enough)
    • MBS206
      Starting again

      By MBS206 · Posted

      I can donate $100 to your upgrade fund. So long as you can donate the IC7 my way....
    • MBS206
      Starting again

      By MBS206 · Posted

      I'd love a Haltech ECU, and Haltech 10 dash. Was having a chat with Rob and Andy @ Haltech when Rob put one in his MR2. First one I'm kind of interested in too, as you can dim it RIGHT down. Andy was saying bright dashes is one of his peeves too!
×
×
  • Create New...