Jump to content
SAU Community

Recommended Posts

300kw-320rwkw easy??? spent about 25k on performance parts an labour to get 300kw atw. Prob cheaper if u find a happy dyno or dont tie the car down real tight to allow it to ride up, from wot i've been told it can make the exact same dyno read about 50-80hp different, depending on how u strap it down. As for the longivity of an engine's life (built or unopened) people usually only seem to quote a certain amount of years/months which isnt really informative, amount of track time, km since rebuilt, %of time driving the car spirited (or over 5-6k rpm) would be more informaitive. as a car that only does 3000km a year an 1 track day, an gets babied, is a lot different to a car that does 20,000km a year a 4 or 5 trackdays a year an gets thrashed every time it gets drivin.

I'll point at Simon and leave it at that ;)

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

300kw-320rwkw easy??? spent about 25k on performance parts an labour to get 300kw atw. Prob cheaper if u find a happy dyno or dont tie the car down real tight to allow it to ride up, from wot i've been told it can make the exact same dyno read about 50-80hp different, depending on how u strap it down. As for the longivity of an engine's life (built or unopened) people usually only seem to quote a certain amount of years/months which isnt really informative, amount of track time, km since rebuilt, %of time driving the car spirited (or over 5-6k rpm) would be more informaitive. as a car that only does 3000km a year an 1 track day, an gets babied, is a lot different to a car that does 20,000km a year a 4 or 5 trackdays a year an gets thrashed every time it gets drivin.

300kw-320rwkw easy??? spent about 25k on performance parts an labour to get 300kw atw. Prob cheaper if u find a happy dyno or dont tie the car down real tight to allow it to ride up, from wot i've been told it can make the exact same dyno read about 50-80hp different, depending on how u strap it down. As for the longivity of an engine's life (built or unopened) people usually only seem to quote a certain amount of years/months which isnt really informative, amount of track time, km since rebuilt, %of time driving the car spirited (or over 5-6k rpm) would be more informaitive. as a car that only does 3000km a year an 1 track day, an gets babied, is a lot different to a car that does 20,000km a year a 4 or 5 trackdays a year an gets thrashed every time it gets drivin.

Give me 25k and ill build you a 500kw+ engine lol, also you'd be lucky to gain 15hp by letting it ride on the top of the rollers, easier to put the air temp sensor in hot water and gain 30kw =)

Give me 25k and ill build you a 500kw+ engine lol, also you'd be lucky to gain 15hp by letting it ride on the top of the rollers, easier to put the air temp sensor in hot water and gain 30kw =)

With warranty? Wheres your shop, I want this 25k 500kw motor

I'd say VQ35HR, then TT (with 2 x 2860).

It will take 50kg out of the front of the car, have more power and torque and last longer. But you'll have to build it first.

I don't see much between a Neo and a RB26 for power/longevity. I'd take a stock NEO for the money with GT30 (0.86) ~280rwkw easy. Once you get over 200rwkw/tonne you're getting into serious grip/chassis issues.

what chassis issues would be ran into? for example a gts4 with a rb26 making 350 atw

The fact that he can run a very reliable and safe 330rwkw+ all day every day with nothing but injectors, fuel pump, exhaust, computer and a set of turbos or a single on it where as the Neo would be a ticking time bomb at those power levels on an unopened motor..

so we're clear here , what do you think the big difference is between the two internally , apart from the piston itself? .

If i were going to build an engine from scratch , i would start with a 'rips' 3 litre bottom end , and put a 26 head on it .

But i have to ask, do you have a car to put it in? , if the answer is no , don't bother with anything engine wise until you have one, there's no point having 400rwk if the rest of the car is dead stock , there is no way you would be able to use the power anywhere . If you want to spend your money wisely , put it in the bank , leave it there until you can legally drive the car you want to . If you still want the same car then , there will always be a few for sale somewhere , you may be lucky and find one with all the hard work already done.

what about a 300zx motor forged with heavy porting and a couple of gt28's bolted on with 25psi with E85, big cams etc...

or an ls1 with twin turbo and supercharger :)

Edited by SliverS2

what chassis issues would be ran into? for example a gts4 with a rb26 making 350 atw

http://www.motoiq.com/magazine_articles/id/2396/team-america-world-time-attack--ark-designs-bnr32-skyline-gt-r-intro-part-1.aspx

3 parts, multiple pages each.

This car has nothing to do with me. But there has been VQ put into r-chassis before. A friend is putting a VQ30DET into an S15 at the moment (the parts are pretty cheap for the HP).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...