Jump to content
SAU Community

Recommended Posts

Can't see where you're located but I asked NISMO about the seats and they told me that only a NISMO tech can install them. I guess they said that per warranty,etc.

I really wanted to do this but I'm set on removing and storing my seats so I install carbon seats

Just had a quick count on my r34 gtr, 26 items on there ranging from intercooler to oil cap to much to list and bore you with,I like those parts always a good fit and top quality, down side not so cheap .

Edited by EM1

I'll start at the front

Nismo intercooler

Nismo piping kit

Nismo plenum

Nismo air flow meters

Nismo air inlet pipe

Nismo air duct

Nismo timing belt

Nismo engine/gearbox mounts

Nismo oil pan baffle set

Nismo oil separator

Nismo fuel pump

Nismo super copper mix clutch

Nismo GT taillight set

Nismo smoked indicator set

Nismo multi function display/fitted from factory

Nismo oil cap / rad cap

Nismo floor mats

Nismo titanium shift knob

Nismo sway bar kit

Nismo s tune suspension

Nismo performance damper kit

Nismo latest ti strut brace

Nismo big operating cylinder

Nismo clutch hose

Nismo brake lines

Nismo carbon fibre blade

And that's it doing an engine build todate and most other parts are hks

Inj,oil pump pistons crank,I could just keep going should be running in the

next month.

Edited by EM1

I'm drooling over this thread

Only a small list at the moment but will be expanding on it (after reading this thread lol)

Nismo leather gear knob

Nismo clear front indicators

Nismo clear side indicators

Nismo car seat covers

Nismo LMGT4 rims (delivered just yesterday :D )

Nismo oil cap

Nismo radiator cap

Nismo fuel cap

On the cards

Nismo wheel nuts

Nismo air valve caps

Nismo floor mats

Nismo engine mounts

Nismo gearbox mounts

And whatever other Nismo stuff I can get my hands on :P

aiiight........ I will kick start this off

IMG_1044_zpse8863aa8.jpg

nismo racing radiator cap - (P/N:21430-RS012)

IMG_1040_zpsec31f0cc.jpg

nengun-1221-02-nismo-clutch_pedal_bracke

nismo reinforced clutch pedal bracket for BNR32 (P/N:46550-RS585)

IMG_1135_zps50c03d16.jpg

IMG_0970_zpsc517862a.jpg

nismo white meter set for center console for BNR32 (sorry for the bad photo will have to take a better one)

IMG_1335_zps29046619.jpg

nismo GT shift knob (titanium version) (P/N:32865-RN013)

IMG_1367_zpsc519ed39.jpg

IMG_1370_zpsba33aa6f.jpg

IMG_1371_zps15bbd06b.jpg

nismo intake collector kit (P/N:24820-RN583)

IMG_1449_zpsf8d58c99.jpg

IMG_1450_zps41a95a5f.jpg

IMG_1474_zps2991c90d.jpg

nismo 320kph Speedometer (P/N:24820-RN583)

IMG_1577_zpse698b13d.jpg

IMG_1578_zps3e07ca92.jpg

IMG_1579_zps70512b89.jpg

IMG_1627_zps2b560b07.jpg

nismo Super Coppermix Twin Plate clutch (BNR32 94 - pull type) rated @ 640ps 9807N (P/N:3002B-RS599)

IMG_1574_zps3a643346.jpg

IMG_1576_zps6676aa22.jpg

nismo Big operating slave cylinder for BNR32 - pull type (P/N:30620-RSR40)

IMG_1573_zps64aea160.jpg
nismo Racing release fork pivot (P/N:30537-RS581)

I have more but will post that later on ;)

  • Like 1
  • 4 weeks later...

Was going thru some stuff and found my nismo key that has been cut but didnt work. Might see if a locksmith can smooth it up a bit and get it working...

* Was it copied off an existing key or off the key code sourced from computer?

* Try a spare blank first and cut that. If it works then use the Nismo key. The cheap copy can be a valet key for the boot. The Nismo one is too valuable to sacrifice of course.

Terry: looking at it I think the profile each side is not 100% aligned properly, it was cut from an original key. It should buff up ok and come back to that nismo bling we all know and love. I was just thinking how really old worn keys usually work well and maybe this one could be smoothed out and made a bit looser.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • haha this shit box doesn't drink coolant, for now       Let me guess, they make heaps of power, use the car for straight line driving and don't care about noise
    • They’re so great that I know of someone pulling one out to go back to a sequential 
    • Hello everyone. I've recently started the research into R34 GTR front bits and running into eye watering prices. On the plus site it looks like some places make 'replacement' fender liners for these cars. At eye-watering-but-less than stock prices. I also noticed there's plenty of diffuser options available too. What I would like to know is if my following assumptions are correct. 1) The OEM guard liners are actually only 'half' the liner. They go together with the OEM brake vents which are a separate item which looks to be quite a large 'panel' that is part of the liner. The GTR bumper has bolt holes along the front. I assume the ones in the vent correspond to the ones the OEM liner does not have (circled?)   2) The V-Spec front diffuser supplants the brake ducts in the above item. I am assuming these still work with the guard liners as there's no alternate part that I'm aware of. I don't see how they go together, so I'm making the assumption that they have to, somehow. I know the center splash guard is different on the V-Spec (and is the price of the damn diffuser alone). How does the liner interact with this? 3) There's alternate front diffusers that do away with it all. Annoyingly, a lot of the clones and CF different ones... have no brake ducts on them. I like the idea of them though. My brakes get hot on the track. These alternate diffusers are a lot cheaper than plastic splash guards. I'm assuming you don't have to/aren't supposed to remove guard liners to run a diffuser. I suspect that quite a few people actually do not run the guard liner because with a front undertray you're getting a lot of 'splash' guarding anyway, and most people remove liners given they're probably running a pretty aggressive setup with a diffuser at the front. It would also be nice to know if anyone has ever run the 'reproduction' guard liners and know whether the fitment is OEM quality or "OEM Quality". Example: https://www.ebay.com.au/itm/356254671561 https://carbonetics.net/products/nissan-skyline-r34-gtr-plastic-front-wheel-arch-set Is this knowledge still around?
    • Really, effort is pretty low. You hand fistfuls of cash over to someone else and pick it up when done...   And at least this shitbox isn't drinking coolant right?  
    • And most chargers that most DIY people own would put bugger all power back into the battery between cylinders. I've always done it with jumper packs/second battery connected. And that's on any car.   Because race car, and wanting the lightness.  At least in an R33, putting a bigger battery in can at least help shift the weight balance backwards  
×
×
  • Create New...