Jump to content
SAU Community

Recommended Posts

  • 1 month later...

So how we going with making a second run? i just got me an OX bar rear bar so figure i need a daleo front bar sooner rather then later

Would be a third run actually. ;)

I've got a bunch of ends machined; I just need to buy some more tube. Any other takers?

Would be a third run actually. ;)

I've got a bunch of ends machined; I just need to buy some more tube. Any other takers?

If you need more takers to do a run, I suppose I can take one. No hurry though.

Edited by Commsman

If you need more takers to do a run, I suppose I can take one. No hurry though.

You got the rear one Leon, and I'd say the front one is a lot more noticeable than the rear. So far anyway, but haven't thrown it around some twisties yet.

Ok, I'll get on it shortly.

Ryan; I do; but I've had very little spare time recently. The next month should see things settling down, and I can focus on this.

You got the rear one Leon, and I'd say the front one is a lot more noticeable than the rear. So far anyway, but haven't thrown it around some twisties yet.

Picked up the rear one from Josh when I was in Brissy yesterday (thanks mate!). Not likely to install either of them till I sort some other stuff out, & really time poor atm.

Really only bought it 'cause of the GB. And I also suspect the front one will be doing the lions' share of the work.

  • 2 months later...

I've been Slacking off with this for a while now; I'll be kicking off again in the next couple of weeks.

If you'd like to have one; either shoot me a PM or reply in the thread.

Cheers, Dale.

I've been Slacking off with this for a while now; I'll be kicking off again in the next couple of weeks.

If you'd like to have one; either shoot me a PM or reply in the thread.

Cheers, Dale.

I do!! Haha I'm away in Europe till the 19th of Feb. But want one for sure as soon as im home

Yeah Dale, as per my post from October LAST YEAR, please count me in too, .....again :P

Can I have mine in Whiteline / Ox Motorsports silver? If not, please leave in unpainted (or undercoated etc) & I'll rattle can it myself.

Thanks maaaate.

Yeah Dale, as per my post from October LAST YEAR, please count me in too, .....again :P

Can I have mine in Whiteline / Ox Motorsports silver? If not, please leave in unpainted (or undercoated etc) & I'll rattle can it myself.

Thanks maaaate.

Lol, yeah; I looked at the date of my last post & thought I'd better get cracking again...

I'm on it.

Lol, yeah; I looked at the date of my last post & thought I'd better get cracking again...

I'm on it.

OH NO YOU DIDN'T!!!

Front reo first! :P

Apparently Theo will be finished my front Bar at the end of this month!

Edited by Jetwreck

Yeah Dale, as per my post from October LAST YEAR, please count me in too, .....again :P

Can I have mine in Whiteline / Ox Motorsports silver? If not, please leave in unpainted (or undercoated etc) & I'll rattle can it myself.

Thanks maaaate.

I do like the idea of Ox bar silver but yeah black is fine also.. Just want some stiffness!! haha that doesnt sound so good

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...