Jump to content
SAU Community

Recommended Posts

Genuine TE37's 17x9" Dark Blue +6 Tyres.

17x9" TE37's that came on my car when I imported it from Japan in 2005. No they are not fakes, they're the real thing. Very light with Rays Engineering & Made In Japan stamped on the back and of course are very light.

Not too sure about the offset as the stickers are long gone but they are a pretty aggressive offset as per the pictures of them on my 32GTR. I don't know if they'll fit under your guards on your car.

Are a little blasted and also have some minor rash.

2 of them have RE540's 255 40 - bald.

Other 2 have new Michelin Drice 235 45 on them, also another two new Michelin tyres unfitted.

No centre caps.

Reason for sale : Have moved to wider TE37's.

Location : Hawthorn East, Melbourne. Will ship if buyer arranges courier.

$2000

Contact  : 0425 730 031

gallery_1646_1323_561477.jpg

gallery_1646_1323_459563.jpg

gallery_1646_1323_190440.jpg

gallery_1646_1323_462727.jpg

gallery_1646_1323_274995.jpg

gallery_1646_1323_266895.jpg

If they are in fact 17x9, i'd put money on them being +22 or +15.

I was under the impression that R32s struggled a bit with +12 offset, but the owner did say they're quite aggressive at the moment.

  • 4 weeks later...
On 6/24/2012 at 8:39 PM, Owgasm said:

If they are in fact 17x9, i'd put money on them being +22 or +15.

I was under the impression that R32s struggled a bit with +12 offset, but the owner did say they're quite aggressive at the moment.

 

wow just found this post again, from when I thought i'd sell these wheels.

Ends up they're 17x9 +0 (yes, 0 offset TE37's - they stick out further than my +12 9.5 TE37's). Long discontinued by Rays.
Glad I kept them. The call for another set of TE37's is strong. Anyway .....back to my beer.

4 minutes ago, Mohsen said:

youre a monster

yeah, I realised now I defiled them, seeing as they were Mag Blue.

I have plans on getting them professionally sprayed back to their original colour.

5 minutes ago, niZmO_Man said:

Sorry, I should have said "pretty much the same as" :D

I should also add that when Racepace took the front brake setup off to replace them,, they discovered a dodgy spacer setup (had some sort of Brembo setup when I got the car from Japan). Hence the front wheels now sit slightly more into the guards then in that photo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...