Jump to content
SAU Community

Recommended Posts

There's a steep driveway at my Mum's place which would abrade low lips like nobody's business at the bottom concave section.

Then I installed a rubber speed hump set. It took half an hour to get the positioning just right & then the masonry bolts went in.

The lower lip only faintly brushes the rubber hump now :)

Link to comment
https://www.sau.com.au/forums/topic/403665-steep-driveway/#findComment-6422140
Share on other sites

Did the dodgy and used a plank of wood and some bricks... looks so shabby

Will look @ investing in some of those rubber speed humps.... I have the same problem with the curve @ the top of the driveway.

Have to reverse up to get out too! Skidding all over the place with the semi slicks ....0.o

Link to comment
https://www.sau.com.au/forums/topic/403665-steep-driveway/#findComment-6422456
Share on other sites

I made a custom lip that was 20mm shorter than standard. Extreme approach but I have the driveway from hell (but ain't moving cause cost us just about everything we owned to get into this place).

Oh and have the wood and bricks too to get out of the garage to the incline on the driveway (goes up then down onto the street).

Link to comment
https://www.sau.com.au/forums/topic/403665-steep-driveway/#findComment-6423403
Share on other sites

Pick and shovel with hard work or a bobcat and cash.

I made a driveway, carport, and level paved area all by hand.

It helps to have construction experience so you get the drainage and retaining walls right.

Second hand pavers and my own ute made it cheap.

My back says i should have paid for a bobcat.

>_<

Link to comment
https://www.sau.com.au/forums/topic/403665-steep-driveway/#findComment-6425277
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...