Jump to content
SAU Community

Recommended Posts

Hi all, going to upgrade my standard 33 s1 rb25 fuel system. looking at a walbro 255, tomei 740cc side feeds and a turbo smart regulator. from what i can gather those are all close to direct fit replacements. is it that easy? are there any major issues i will come across that im sure someone else would have already found? any help would be great

Link to comment
https://www.sau.com.au/forums/topic/403666-rb25-fuel-system-upgrade/
Share on other sites

Do as was mentioned above, pump (hard wired for alternator voltage) and injectors.

You probably won't need 740's though, unless you are thinking this turbo isn't going to be the last/biggest one you get

In saying that Mitch i made the mistake of buying 550's and then had to buy 1000's later for E85, bigger isnt always a bad thing and the prices are similar, as long as they are decent injectors go nuts :)

In saying that Mitch i made the mistake of buying 550's and then had to buy 1000's later for E85, bigger isnt always a bad thing and the prices are similar, as long as they are decent injectors go nuts :)

By all means get the bigger injectors if planning to go e85 or get a bigger turbo down the track, as there is no difference in price really. But if intending to leave it at the highflow on 98 then 555's will do the job as well.

In retrospect i would have gone 740's as well because you get the power bug once you start!

yeah get good quality big cc injectors straight up 740s will cover you for alot of power...just saves headaches should you wish to upgrade later....

get big cc cheapo injectors now and you risk a crappy idle and bad fuel economy...

can we get a list of possible injectors for high power applications, so far i have deatchworks 1000cc but not sure bout idle and quality and fitment, power enterprise but have found they can have idle issues and be lazy? ID or xspurt 1000's but ill need to mess round with a top feed rail which is not encouraging, and then nismo's which are expensive,

just want to know what is the choice injector. and do it first time right...

Dude, it's a 25.... So many options!!! I went HKS rail and am happy az....

When it comes to advice, Guilt_Toy and Ash are as good as it gets, don't ignore it :)

you can xspurts or IDs in with the stock plenum on a 33 ,fuel rail is only 100$ regs arent too expensive either, fuel hose is cheap also and you will need a pressure gauge which is 20$..

I got.xspurts in 750cc in 40mm, which are shorter than IDs which are 48mm, so makes for an easier fit,, I think both will fit, I'm yet too see IDs with stock plenum but it could be done..

.Injector will cost you 6-700$ and they are amongst the best..Ask anyone and they will tell you they are great to tune, great at idle and great for economy too...

heres mine fitted up, I got them in without removing the plenum, tricky but possible

29012012564.jpg

29012012565-1.jpg

fuel rail

http://goodiesdirect...&product_id=405

Do it once, do it right... :thumbsup:

you can xspurts or IDs in with the stock plenum on a 33 ,fuel rail is only 100$ regs arent too expensive either, fuel hose is cheap also and you will need a pressure gauge which is 20$..

I got.xspurts in 750cc in 40mm, which are shorter than IDs which are 48mm, so makes for an easier fit,, I think both will fit, I'm yet too see IDs with stock plenum but it could be done..

.Injector will cost you 6-700$ and they are amongst the best..Ask anyone and they will tell you they are great to tune, great at idle and great for economy too...

heres mine fitted up, I got them in without removing the plenum, tricky but possible

29012012564.jpg

fuel rail

http://goodiesdirect...&product_id=405

Do it once, do it right... :thumbsup:

Thanks guys , just made my decision easy :thumbsup:

Just one last question, i rang EFI today and also horsepower solutions, 2 recommended on here about ethanol, got two different bits of advice

EFI said a 400lph walbro will be an absolute minimum for 300kw and need 800cc minimum injectors

Horsepower solutions says 2X 044 externals and was very sure about it, said ill use almost double the 98 i use when flat out

so the 2X 044's is extreme dont you think? and said ill make 320kw

now im thinking more that EFI know what there on about, but if a 400lph walbro is minimum what more can i do??

if the gtx3076 is to get upto 22psi without restriction, im thinking a walbro 400lph and Xspurt 1000's, should i expect 340kw's here?????

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...