Jump to content
SAU Community

Recommended Posts

Hey guys

I'm wondering if it's possible to tune a rb26 on 95 octane and still produce decent numbers with out detonation.

At the moment I'm living in the sticks and 95 is all that's available right now. I have developed a real pesky itch to buy another skyline and the fuel issue is the only thing holding me back.

Cheers

Scott

Link to comment
https://www.sau.com.au/forums/topic/404677-running-95ron-with-300kw/
Share on other sites

i reckon it could be done but youll be limited by how much boost you can run

otherwise you will just comprimise tuning for boost which will give you that doughey effect

many people overseas from memory run spazzo power on penis fuel so it can be done

if you were going to try i would do a reasonable timing map - maybe even just a bit of a tune of the stock map and then run a small amount of boost

and slowly increase boost and go from there

intake temp, engine compression and boost will all work against the lower octane so make sure these are managed well

ie dont have a hot pod sucking hot air

many people overseas from memory run spazzo power on penis fuel so it can be done

That's very different, you can't really compare our octane ratings with other countries octane ratings. Not only does altitude affect the fuels performance, but some places like USA and Canada use the Anti-Knock Index instead of RON, so their numbers look different to ours but are in fact the same or better.

Hey wedge_r34gtr

I sold my r33 before I came to Hedland and now that I'm making good money I want to splurge on an insane gtr but the only thing stoping me is the lack of 98ron.

The only places that sell the required fuel that I know of are Capricorn road house near newman and down karratha way which is quite unfortunate.

Thanks for the info guys, I might just go and buy a road bike instead.

Hey wedge_r34gtr

I sold my r33 before I came to Hedland and now that I'm making good money I want to splurge on an insane gtr but the only thing stoping me is the lack of 98ron.

The only places that sell the required fuel that I know of are Capricorn road house near newman and down karratha way which is quite unfortunate.

Thanks for the info guys, I might just go and buy a road bike instead.

As someone said above - water / methanol injection! Would be perfect and would help in the hot climate up there.

I just done some reading up on the aem setup and it sounds good.

Anyone had any experiance with water/methanol injection?

How long would a tank last?

would placing the nozzle infront of the throttle body be better than placing it infront on the turbo housing?

Any info would be very much appreciated.

I just done some reading up on the aem setup and it sounds good.

Anyone had any experiance with water/methanol injection?

How long would a tank last?

would placing the nozzle infront of the throttle body be better than placing it infront on the turbo housing?

Any info would be very much appreciated.

There's a 16 page thread just a few down ...

the piont is, it can be done if you can be bothered, have no other fuel choice and are prepared to spend some time learning about different setups

if you cant be bothered, expect instant results and want to run the same boost and setup as 98 then yeah it wont work, but if you are open to some research and other options then you can do it with comprimises

  • 1 month later...

im also in hedland and had my GT-R tuned for 95.

You do miss out on alot of power but i would not get a GT-R because of the lack of fuel. i know of many performance cars that have also been tuned for 95 and all run fine without a problem.

My 33 will be up for sale soon, if your looking.

Wasn't Mr Mafias original octane drama because he didn't have a local supply of 98 ULP ?

People I know that work there tell me its often very hot and humid and not the best conditions for high performance petrol engines .

Water injection sounds good and is possibly the only practical alternative if you can't get higher octane fuel or E85 .

Dusty dirty hot humid salt air , enemy of machinery . A .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
×
×
  • Create New...