Jump to content
SAU Community

Recommended Posts

So it worked for you too aye? Well i guess its good news we found the cure, but i dont understand why it needs that extra second. Atleast i wont have the dodgy start ups anymore. And i guess that aac valve didnt really do much in the end. Only way the aac valve would help the start up problem was if you increased the idle speed, which was getting rather annoying, hence why i returned it back to normal and done this little experiment ;p. Glad it worked your you as well!

picked the car up from paden , he adjusted something but was really strapped for time and had to get to work so didnt get to ask him what exactly.

he did also clean the aac valve ,and this morning it seemed to be fine , but will have to wait to see if the problem is solved

picked the car up from paden , he adjusted something but was really strapped for time and had to get to work so didnt get to ask him what exactly.

he did also clean the aac valve ,and this morning it seemed to be fine , but will have to wait to see if the problem is solved

Ohh really?? Niceee, might be the idle perhaps?? Did you notice it idling slightly higher? As long as the problems gone should be all sweet =)

Ohh really?? Niceee, might be the idle perhaps?? Did you notice it idling slightly higher? As long as the problems gone should be all sweet =)

it idles a but higher but started my car this morning and it did the same thing. So i held the key in the start position for a bit longer then cranking and it worked!

as suggested previously this is the fix , but what is the cause?

it idles a but higher but started my car this morning and it did the same thing. So i held the key in the start position for a bit longer then cranking and it worked!

as suggested previously this is the fix , but what is the cause?

In all honesty i have no clue what the cause is, at least we've sold the problem. Still would like to know why that extra 1 second determines whether the car starts like crap or not. Might ask the mechanic.

sorry mate you lost me, no clue what a moderator sticky is =p

sticky = A Topic or thread that is at the top of a section and marked as important .Stickys contain important information which each member should read.

Mod = Moderator = A person who moderates an Internet bulletin board or chat room

sticky = A Topic or thread that is at the top of a section and marked as important .Stickys contain important information which each member should read.

Mod = Moderator = A person who moderates an Internet bulletin board or chat room

Ohhh right my bad, will do!

ur not a mod man , its not something u can do

Ohhh right my bad, i get ya, sorry i dont use these forums much until recently. Thought the person who started the topic is in control of it.

Anyways for anyone who does visit this forum, we just turn the key for an extra second while starting up in the morning and it solves the start up problem, however we just dont know what the problem is although we found the cure.

  • 2 weeks later...

For some reason my car doesn't do it anymore.

Now it starts fine, little higher idle while cold, then goes to the normal 650-700rpm once warmed up, Then somtimes after stopping it idles high before dropping to the normal again.

Anyway cold starting problem is no more. fingers crossed

Just a note guys your TPS can cause this issue too. Tps giving a false reading when cold makes the af ratio go way rich causing idle and stalling problems. Test your tps with a multi meter. Its not an issue when the engine is warm as the warm engine can cope with the richer mixture.

Regards

Drews performance and mechanical repairs

Edited by vh45tt

this has been happening with mine as well, i have cleaned the AAC valve with little success. i am going to try the holding the key on longer tomorrow morning. With this action will it not hurt the starter tho? Thanks for this forum tho much help

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...