Jump to content
SAU Community

Recommended Posts

So it worked for you too aye? Well i guess its good news we found the cure, but i dont understand why it needs that extra second. Atleast i wont have the dodgy start ups anymore. And i guess that aac valve didnt really do much in the end. Only way the aac valve would help the start up problem was if you increased the idle speed, which was getting rather annoying, hence why i returned it back to normal and done this little experiment ;p. Glad it worked your you as well!

picked the car up from paden , he adjusted something but was really strapped for time and had to get to work so didnt get to ask him what exactly.

he did also clean the aac valve ,and this morning it seemed to be fine , but will have to wait to see if the problem is solved

picked the car up from paden , he adjusted something but was really strapped for time and had to get to work so didnt get to ask him what exactly.

he did also clean the aac valve ,and this morning it seemed to be fine , but will have to wait to see if the problem is solved

Ohh really?? Niceee, might be the idle perhaps?? Did you notice it idling slightly higher? As long as the problems gone should be all sweet =)

Ohh really?? Niceee, might be the idle perhaps?? Did you notice it idling slightly higher? As long as the problems gone should be all sweet =)

it idles a but higher but started my car this morning and it did the same thing. So i held the key in the start position for a bit longer then cranking and it worked!

as suggested previously this is the fix , but what is the cause?

it idles a but higher but started my car this morning and it did the same thing. So i held the key in the start position for a bit longer then cranking and it worked!

as suggested previously this is the fix , but what is the cause?

In all honesty i have no clue what the cause is, at least we've sold the problem. Still would like to know why that extra 1 second determines whether the car starts like crap or not. Might ask the mechanic.

sorry mate you lost me, no clue what a moderator sticky is =p

sticky = A Topic or thread that is at the top of a section and marked as important .Stickys contain important information which each member should read.

Mod = Moderator = A person who moderates an Internet bulletin board or chat room

sticky = A Topic or thread that is at the top of a section and marked as important .Stickys contain important information which each member should read.

Mod = Moderator = A person who moderates an Internet bulletin board or chat room

Ohhh right my bad, will do!

ur not a mod man , its not something u can do

Ohhh right my bad, i get ya, sorry i dont use these forums much until recently. Thought the person who started the topic is in control of it.

Anyways for anyone who does visit this forum, we just turn the key for an extra second while starting up in the morning and it solves the start up problem, however we just dont know what the problem is although we found the cure.

  • 2 weeks later...

For some reason my car doesn't do it anymore.

Now it starts fine, little higher idle while cold, then goes to the normal 650-700rpm once warmed up, Then somtimes after stopping it idles high before dropping to the normal again.

Anyway cold starting problem is no more. fingers crossed

Just a note guys your TPS can cause this issue too. Tps giving a false reading when cold makes the af ratio go way rich causing idle and stalling problems. Test your tps with a multi meter. Its not an issue when the engine is warm as the warm engine can cope with the richer mixture.

Regards

Drews performance and mechanical repairs

Edited by vh45tt

this has been happening with mine as well, i have cleaned the AAC valve with little success. i am going to try the holding the key on longer tomorrow morning. With this action will it not hurt the starter tho? Thanks for this forum tho much help

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...