Jump to content
SAU Community

Recommended Posts

Not sure on the bar yet, I can't see how the handling can get any better actually. 2nd gear coming out of MG corner at PI and all 4 just gripped and took off, no front pushing and no rear stepping out, totally neutral and far beyond my expectations.

You may have a hard time getting the GT35 to fit as the HKS flange adapter steps down to T2 an I'm guessing your GT35 rear is T3.

  • Replies 182
  • Created
  • Last Reply

Top Posters In This Topic

Not sure on the bar yet, I can't see how the handling can get any better actually. 2nd gear coming out of MG corner at PI and all 4 just gripped and took off, no front pushing and no rear stepping out, totally neutral and far beyond my expectations.

You may have a hard time getting the GT35 to fit as the HKS flange adapter steps down to T2 an I'm guessing your GT35 rear is T3.

So you havnt got this bar yet and already you feel with FI you have great grip? I have white line sways, endlinks, bc racing br coils, RS3.. no rear or front strut bars..

as for turbo i havnt got it yet, but one i was looking at was off a xr6 so nto sure on T size... is that what you make an adapter for?

So you havnt got this bar yet and already you feel with FI you have great grip? I have white line sways, endlinks, bc racing br coils, RS3.. no rear or front strut bars..

as for turbo i havnt got it yet, but one i was looking at was off a xr6 so nto sure on T size... is that what you make an adapter for?

I've got all of that plus a front strut brace, and mine turns in incredibly. Might be worth looking at?

AWD ftw. I don't think it would be that neutral in rear drive. lol.

For a turbo like that I would at least need the turbo here to jig it up, i'm not entirely sure it will fit as my GTX3076 only clears by a few mm. (the GT35 has a larger compressor housing) You would probably need to buy a Tial stainless vband rear housing and get it hacked up due to space constraints, and mount the wastegate off that. PM me for more info.

Hi All,

Just letting you know that this GB closes tomorrow.

This is the list so far of people that have said they have paid:

Commsman

LineItUp

R6n350GT

rosella

dcdc

Howaitonaito

Rudi_ARX-TURBO

Ot1

Mr 20Valve

Skip_o_Valov

joshm35

WAGON_BOY

bigkevracer

ironpaw

impul535w

scotty nm35

Sydsyd

Daleo

Jetwreck

Prince Skyline

If you have paid and your not on the list let me know.

cheers

Craig

Nate, where are you getting yours sent?

There's at least 2 guys on the list above from Brisbane (Joshm35 & dcdc), you're at the Goldy & I'm not that far further south.

I'm OK with mine going to one of the Brissy guys. I can get it from there & drop yours off. Or if you are in more of a hurry, I'll get mine from you at Robina :)

Craig, is 4 bars enough to do a combined post to Qld?

just transferred today, might arrive tomorrow or the day after, depends on each bank's transfer protocols.

pls let me know if you haven't get it by Thursday, there's always a stupid chance of the money bounced back.

Nate, where are you getting yours sent?

There's at least 2 guys on the list above from Brisbane (Joshm35 & dcdc), you're at the Goldy & I'm not that far further south.

I'm OK with mine going to one of the Brissy guys. I can get it from there & drop yours off. Or if you are in more of a hurry, I'll get mine from you at Robina :)

Craig, is 4 bars enough to do a combined post to Qld?

Yeah id be happy to get mine from robina..

Nate, where are you getting yours sent?

There's at least 2 guys on the list above from Brisbane (Joshm35 & dcdc), you're at the Goldy & I'm not that far further south.

I'm OK with mine going to one of the Brissy guys. I can get it from there & drop yours off. Or if you are in more of a hurry, I'll get mine from you at Robina :)

Craig, is 4 bars enough to do a combined post to Qld?

I'm in Brisbane too!

I'm in Brisbane too!

That makes 3 then.

Yeah id be happy to get mine from robina..

Sorry Josh, I'm voting you as the delivery point, lol. Makes sense if more of you are in Brisbane.

Either that or you all come down here for a vist...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...