Jump to content
SAU Community

Recommended Posts

That's normal.

as i know Nissan Australia also have no stock available for tyres for R35

so they will shop around the country for a set for their customer.

Sorry, what I meant to say, is that my brand new 2010 GTR came with the R2's. Interesting that the R2's are supplied on the V-Spec, makes me wonder if my GTR did some track time between 0-43kms on the clock, and they swapped out the tyres for newies before delivery.

  • Replies 227
  • Created
  • Last Reply

Top Posters In This Topic

I have a set of R2's sitting in my garage which I will switch over as soon as my current tyres are gone (probably in the next week or so).

From what I have read on NAGTROC, R2's were also on some later models of r35 (at least this was the case in the states) and not just v specs

http://www.skylinesa...-bars-for-sale/

For sale genuine front and rear bumper bars to suit a 2009 R35 GTR painted a bronze colour

The rear bar includes the lower spoiler and the GTR emblem

Pick up only in Blackburn, Victoria during business hours

Front bar $1000

Rear bar $1500

Both are in fair condition but have some marks and scratches (see photos)

Please contact Karen on [email protected]

Photos in the above link

*************************************************************************

Price Drop

Front bar $800

Rear bar $1200

*************************************************************************

Edited by Bencar
Lol Alan we had the black edition for 2009 and 2010 - red highlight seats and black roof lining We have lost it for 2011/12 as Nissan now import the base model to save costs

but we do not have the optional BE wheels lol

arent we name them here as premium edition & base model ???

Enkie Wheels

18 x 10 +22 with Michelin S7 slicks

wheels are unmarked

Tyres have done 2 tracks days and still have a good day or two left in them yet

(purchased new 3 weeks ago for $3200)

Want $2800 for the lot. Can deliver Australia wide

email me at [email protected]

or call on 0400 777 111

Im in Wollongong...an hour south of Sydney

enkiewheels1.jpg

enkiewheels2.jpg

enkiewheels3.jpg

Edited by Speedah

i sold my R35, looking for a R34 VSPEC 2 now, if anyone have a good one, let me know

i got few carbon parts for sale here

wald style rear wide fender $1480

wald style rear bumper addon diffuser $1180

wald style rear spoiler addon (like a fin) $398

wald style rear spoiler blade attach $399

and a set of engine cover $399

and cooling panel, $379

also full carbon interior cover $600 all together

all brand new and made by geniune full carbon

right now all half price.

tel:0435717717

email: [email protected]

post-89994-0-68521700-1342578737_thumb.jpg

post-89994-0-23650100-1342578783_thumb.jpg

post-89994-0-56002100-1342578868_thumb.jpg

post-89994-0-00442400-1342578929_thumb.jpg

Hi guys have a set of RE070 brand new for sell due to buying R888 255/35/20 x 2 285/30/20 x 2 Made: bridgestone RE070R run flat Price $2850 Pm / contact for more detail tyres located in melbourne vic. condition: brand new never fitted. still come with sticker

Price Drop for quick sell.

$2550 (extra for shipping interstate)

My mate has a R34 GT-R V-Spec II Nur R1 (Factory fitted and built from Nismo Omori Factory tags on motor and body) this car is actually just quicker than a stock 2009 R35 if you don’t do a standing start.

I have driven this R34 several times and it makes you smile every time due to the raw power of the R1

The R35 is smother more practical car for everyday use, but the R34 GT-R “R1” would hold its value a lot more over years to come and just as much fun to drive.

If you twisted my mates arm he would sell the car too if you are intrested Jason, Picture below

post-36356-0-70569400-1342654053_thumb.jpg

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers)
    • One other thing to mention from my car before we reassemble and refill. Per that earlier diagram,   There should be 2x B length (40mm) and 6x C length (54mm). So I had incorrectly removed one extra bolt, which I assume was 40mm, but even so I have 4x B and 5x C.  Either, the factory made an assembly error (very unlikely), or someone had been in there before me. I vote for the latter because the TCM part number doesn't match my build date, I suspect the TCM was changed under warranty. This indeed led to much unbolting, rebolting, checking, measuring and swearing under the car.... In the end I left out 1x B bolt and put in a 54mm M6 bolt I already had to make sure it was all correct
    • A couple of notes about the TCM. Firstly, it is integrated into the valve body. If you need to replace the TCM for any reason you are following the procedure above The seppos say these fail all the time. I haven't seen or heard of one on here or locally, but that doesn't mean it can't happen. Finally, Ecutek are now offering tuning for the 7 speed TCM. It is basically like ECU tuning in that you have to buy a license for the computer, and then known parameters can be reset. This is all very new and at the moment they are focussing on more aggressive gear holding in sports or sports+ mode, 2 gear launches for drag racing etc. It doesn't seem to affect shift speed like you can on some transmissions. Importantly for me, by having controllable shift points you can now raise the shift point as well as the ECU rev limit, together allowing it to rev a little higher when that is useful. In manual mode, my car shifts up automatically regardless of what I do which is good (because I don't have to worry about it) but bad (because I can't choose to rev a little higher when convenient).  TCMs can only be tuned from late 2016 onwards, and mine is apparently not one of those although the car build date was August 2016 (presumably a batch of ADM cars were done together, so this will probably be the situation for most ADM cars). No idea about JDM cars, and I'm looking into importing a later model valve body I can swap in. This is the top of my TCM A couple of numbers but no part number. Amayama can't find my specific car but it does say the following for Asia-RHD (interestingly, all out of stock....): So it looks like programable TCM are probably post September 2018 for "Asia RHD". When I read my part number out from Ecutek it was 31705-75X6D which did not match Amayama for my build date (Aug-2016)
    • OK, Step 3, if you need to remove the valve body, either to replace it, the TCM, or to do a more complete drain.  First, you need to disconnect the TCM input wires, they are about half way up the transmission on the drivers side. One plug and the wires are out of the way, but there is also a spring clip that stops the socket from sliding back into the transmission. On my car the spring clip was easy to get, but the socket was really stuck in the o-ring of the transmission housing and took some.....persuasion. You can see both the plug to remove (first) and the spring clip (second) in this pic Incidentally, right next to the plug, you can see where the casting has allowance for a dispstick/filler which Nissan decided not to provide. there is a cap held on with a 6mm head bolt that you can remove to overfill it (AMS recommend a 1.5l overfill). Final step before the big mess, remove the speed sensor that is clipped to the valve body at the rear of the box.  Then removal of the Valve Body. For this the USDM Q50 workshop manual has a critical diagram: There are a billion bolts visible. Almost all of them do not need to be removed, just the 14 shown on the diagram. Even so, I both removed one extra, and didn't check which length bolt came from which location (more on that later....). Again it is worth undoing the 4 corners first, but leaving them a couple of turns in to hold the unit up....gravity is not your friend here and trans oil will be going everywhere. Once the corners are loose but still in remove all the other 10 bolts, then hold the valve body up with 1 hand while removing the final 4. Then, everything just comes free easily, or like in my case you start swearing because that plug is stuck in the casing. Done, the valve body and TCM are out
    • OK, so if you are either going for the bigger fluid change or are changing the valve body which includes the Transmission Control Module (TCM), first you should have both a new gasket 31397-1XJ0A and a torque wrench that can work down to 8Nm (very low, probably a 1/4 drive one). You can probably get by without either, but I really didn't want to pull it all apart together due to a leak. First, you now need that big oil pan. The transmission pan is 450 long x 350 wide, and it will probably leak on all sides, so get ready for a mess. There are 24x 6mm headed bolts holding the pan on. I undid the 2 rear corners, then screwed those bolts back in a couple of turns to let the pan go low at that end, then removed all the middle bolts on each side. Then, undo the front corner bolts slowly while holding the pan up, and 80% of the fluid will head out the rear. From there, remove the remaining bolts and the pan is off. You can see it is still dripping oil absolutely everywhere...it dripped all night.... I got another couple of litres when I removed the pan, and then another few when I removed the valve body - all up another 4l on top of the 3 already dropped in step 1.
×
×
  • Create New...