Jump to content
SAU Community

Recommended Posts

SAFC did wonders for me. Went from ~140rwkw @ 7psi to ~200rwkw on 8.5psi. For basic "stage-one" mods such as yours they're good to gain that little bit extra. I'm now going Nistune as the car is past what an SAFC can handle.

Link to comment
https://www.sau.com.au/forums/topic/407413-safc/#findComment-6496398
Share on other sites

I've got an SAFC II lying around that I used to have on my car. The unit is in PERFECT condition but I stripped back the wires to bare to which is how I spliced in into the stock R33 loom. You can have it for $180 + postage from Brisbane, I've even got the stand.

It was very handy when I had 10psi and R34 SMIC, 3" exhaust to prevent rich and retard section of the maps. But don't expect to be able to run 15psi and make 220rwkw. Nistune is a good option if you have a bit more $$$.

Link to comment
https://www.sau.com.au/forums/topic/407413-safc/#findComment-6496558
Share on other sites

IMHO, small mods like upping the boost, exhaust & fmic ra ra.. good investment to tidy up the air fuel ratios.

Even change from the stock airbox to a pod filter will affect air fuel ratios a bit, I find that running a pod in stock form makes the car run a tad richer (I've seen it with my own eyes on my old car, using an Innovate wideband O2).

If you're planning just to do simple mods, I see why not.

Link to comment
https://www.sau.com.au/forums/topic/407413-safc/#findComment-6501381
Share on other sites

Yeah that's it, just invest in a wideband o2 and use it to tidy up your A/F ratios.

If you ever need a hand, I can provide that service for a slab of beer, and if you want to get it dynoed with me tidying it up, there are few places that hire out dynos for $100 per hour.

Link to comment
https://www.sau.com.au/forums/topic/407413-safc/#findComment-6501463
Share on other sites

SAFC is basicaly a piggy back that allows u to change ur air fuel mix eg run more boost and not lean it out amongst other things. Best investment I have made is the PFC. Get a good tunable ecu. I gained 30rwkw from a boost increase to 10psi and a tune on a pretty stock setup, just exhaust FMIC and ecu. Then later when u want more u just add ur mods and retune. Find a good tuner your happy with. See what the tuner does best for your car and do your ur research. Purchase. Tune. Happy Days. If your going to mod later why buy a SAFC to tune then an ecu to tune. Its just an extra expense that you will sell off.

Edited by FordyR31
Link to comment
https://www.sau.com.au/forums/topic/407413-safc/#findComment-6502282
Share on other sites

not sure im convinced with "waste of money" or "does nothing"

it has limitations and isnt the be all and end all but if you can get one cheap and can get some cheap tuning time you can net yourself some good gains basically everywhere in the RPM range

Link to comment
https://www.sau.com.au/forums/topic/407413-safc/#findComment-6508996
Share on other sites

if anybody else has one coming up for sale can you please let me know? interested as i have similar mods makin around 190rwkw and am not looking for massive gains just a bit of options when it came to tuning. not looking for pfc or nisstu thanks!

Link to comment
https://www.sau.com.au/forums/topic/407413-safc/#findComment-6509374
Share on other sites

if anybody else has one coming up for sale can you please let me know? interested as i have similar mods makin around 190rwkw and am not looking for massive gains just a bit of options when it came to tuning. not looking for pfc or nisstu thanks!

Here's one:

http://www.trademe.c...n-507453930.htm

and a bunch more from $90 to $500

http://www.ebay.com.au/sch/i.html?_trksid=p3907.m570.l1313&_nkw=SAFC&_sacat=0

Link to comment
https://www.sau.com.au/forums/topic/407413-safc/#findComment-6509471
Share on other sites

SAFC's are fine for mild mods, they aren't as shit as people think. If you're on a budget they go ok.

Exactly true, great for tidying up a/f ratios. Back in the days when I was a broke uni student, the best I could afford was a SAFC. I borrowed a wideband O2, and cleaned up my a/f ratio.

Don't worry about those keyboard warriors, for simple mods on your car, a SAFC is great.

Link to comment
https://www.sau.com.au/forums/topic/407413-safc/#findComment-6509807
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Had another look at the car and I noticed the fuel pump isn't priming on ignition. I'd taken out the pump from the boot to siphon out the old fuel, so maybe I've knocked something loose or broken a wire putting things back together. Will go back with a multimeter and try to work out what's stuffed. Kinda hoping it's the pump itself thats gone so I can upgrade it
    • Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is [email protected]   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
×
×
  • Create New...