Jump to content
SAU Community

Recommended Posts

Hey guys, got some left over bits after upgrading. Vehicle has done 94,000kms so everything is in excellent condition unless otherwise noted.

I''m negotiable on some things if you think they're too dear!

All parts can be either picked up from Melbourne western suburbs after hours or from Hawthorn during business hours.

I''m happy to box things up to post interstate but postage is at your cost.

Cheers.

Original GT-R Coilovers. Very good condition, no signs of oil leaks at all. $200.

Original GT-R 444cc Injectors with Resistor and plugs. Upgraded to 1000cc's so not needed. Worked perfect. $350.

K&N M''s Intake Piping. Probably need new filters. Comes with Jecs air flow sensors and plugs. $200.

Original GT-R Steering Wheel. Exceleent condition for age, tiny bit of roughening on top. $200.

Original GT-R Fuel Pump. Worked perfectly. $75.

Orignal GT-R Cam Gears. No signs of wear. $25.

GReddy Boost Guage. Pretty good condition. Illuminates green. $50.

HKS EVC Boost Controller. Worked fine. Bit tacky looking on top from being taped to dash. $100.

Z32 Air Flow Sensor Plug. New plug, original wiring. $15.

Ski chains for 14-18"" Wheels. See picture for exact sizes they fit. Why hire?? $75.

FREE!!! Orignal Radiator. No leaks but probably needs a flush. $$Postage Only.

Please let me know if you need any pictures or further info.

Thanks for looking!

post-92503-0-31121500-1345599030_thumb.jpg

post-92503-0-10579300-1345599037_thumb.jpg

post-92503-0-26006200-1345599047_thumb.jpg

post-92503-0-76408000-1345599059_thumb.jpg

post-92503-0-46785400-1345599068_thumb.jpg

post-92503-0-48675900-1345599075_thumb.jpg

post-92503-0-90485900-1345599083_thumb.jpg

post-92503-0-30847600-1345599091_thumb.jpg

post-92503-0-66662800-1345599130_thumb.jpg

post-92503-0-05133100-1345599142_thumb.jpg

post-92503-0-27703900-1345599149_thumb.jpg

post-92503-0-56303600-1345599208_thumb.jpg

post-92503-0-76620600-1345599215_thumb.jpg

post-92503-0-06960100-1345599226_thumb.jpg

post-92503-0-52726400-1345599237_thumb.jpg

post-92503-0-34888400-1345599245_thumb.jpg

post-92503-0-19140900-1345599278_thumb.jpg

post-92503-0-52601700-1345599288_thumb.jpg

post-92503-0-30493200-1345599298_thumb.jpg

post-92503-0-28900000-1345599307_thumb.jpg

post-92503-0-96387500-1345599316_thumb.jpg

post-92503-0-01852800-1345599326_thumb.jpg

post-92503-0-60188900-1345599335_thumb.jpg

post-92503-0-75463800-1345599344_thumb.jpg

Injectors (and resistor), Boost Controller and Boost Guage sold pending payment......

Injectors (and resistor), Boost Controller and Boost Guage sold and picked up.

Negotiable on everything. Especially the big $hit that's taking up room in my garage!

Price updates.

Original GT-R Coilovers. Very good condition, no signs of oil leaks at all. $150.

K&N M''s Intake Piping. Probably need new filters. Comes with 2X genuine Jecs air flow sensors and plugs. $100.

Original GT-R Steering Wheel. Exceleent condition for age, tiny bit of roughening on top. $150.

Original GT-R Fuel Pump. Worked perfectly. $50.

Orignal GT-R Cam Gears. No signs of wear. $15.

Z32 Air Flow Sensor Plug. New plug, original wiring. $10.

Ski chains for 14-18"" Wheels. See picture for exact sizes they fit. Why hire?? $50.

FREE!!! Orignal Radiator. No leaks but probably needs a flush. $$Postage Only.

Coilovers sold pending payment/pickup Monday.

Open to offers on everything else!!!

Good work Brad! Thanks for that.

Hopefully Jacob who bought the EVC see this as I''m sure it''ll come in handy.

Thanks again Brad. Remember to bust my balls if you have ID1000 issues!

  • 2 weeks later...

Couple of things left if anyone is interested-

K&N M's Intake Piping. Probably need new filters. Comes with 2X genuine Jecs air flow sensors and plugs. $75.

Original GT-R Steering Wheel. Exceleent condition for age, tiny bit of roughening on top. $125.

Original GT-R Fuel Pump. Worked perfectly. $50.

Orignal GT-R Cam Gears. No signs of wear. $10.

Z32 Air Flow Sensor Plug. New plug, original wiring. $10.

Ski chains for 14-18" Wheels. See picture for exact sizes they fit. Why hire?? $50.

FREE!!! Orignal Radiator. No leaks but probably needs a flush. $$Postage Only.

A few extra bit in addition to above-

Genuine mats, pretty good condition, would come up good with a clean $50

DSC07395.jpg?t=1347192787DSC07396.jpg?t=1347192792

Brand new 80mm throttle body with weld on adapter (was purchased for SR20 but will work on other cars $150.

DSC07389.jpg?t=1347193391

DSC07390.jpg?t=1347193350

DSC07391.jpg?t=1347193165

Brand new 3" Weld in high flow cat 100 cell. $175.

DSC07392.jpg?t=1347193137

DSC07393.jpg?t=1347192969

  • 4 weeks later...
  • 1 month later...

Last bump before remaining stuff goes into storage (the bin!)

This is what's left-

K&N M's Intake Piping. Probably need new filters. Comes with 2X genuine Jecs air flow sensors and plugs. $25.

post-92503-0-19140900-1345599278_thumb.jpg

Ski chains for 14-18" Wheels. See picture for exact sizes they fit. Why hire?? $25.

post-92503-0-06960100-1345599226_thumb.jpg

Genuine mats, pretty good condition, would come up good with a clean $25

DSC07395.jpg?t=1347192787

FREE!!! Orignal Radiator. No leaks but probably needs a flush. $$Postage Only

Brand new 80mm throttle body with weld on adapter (was purchased for SR20 but will work on other cars $125.

DSC07389.jpg?t=1347193391

Brand new 3" Weld in high flow cat 100 cell. $125

DSC07392.jpg?t=1347193137

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...