Jump to content
SAU Community

Recommended Posts

Hey guys, thinking about building an RB30/26 on the side to put in my 33 GTR.

Has anyone done an accurate cost calculation of the whole conversion?

These are my rough calculations-

RB30 $300

Pistons $700

Rods $600

Sump adapter $1000

Head gasket $450

Gaskets $300

Bearings $150

Main bolts $150

Head bolts $150

Machining $500??

Other stuff (tensioner, cam belt, etc) $300

Total $4600

How does that sound? What have I missed, or miscalculated?

Love to hear cost saving techniques or good sources for the bits.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/408323-anyone-done-an-rb3026-cost-analysis/
Share on other sites

Ain't that the truth!

The parts cost won't change it's just the extra stuff you don't allow for that adds up. Plus the fact that more power is never enough!

I read your build thread, any ideas what just your engine cost?

What ever estimate you come up with, budget for double.

Word

Remember all the bits and pieces like oil pumps, water pumps, power steering pumps, belts, mods on exhaust ect ect.

Im not saying dont do it, just find someone who has and get all the good news from them.

My 2530 rocks, only thing I wish was different was that I used a NEO head.

I think I've heard about a Neo converted 26 head, anyone know anything bout that?

Sounds like the best of both worlds.

In regards to the standard conversion I'd do 90% of the work myself so labour no probs, just machining I could see blowing out.

It can be done relatively cheaply like mine - stock pistons rods etc - just new rings bearings and rod bolts. You can get adapters for more like $400 these days.

But if you're going to all the trouble anyway and its for your GTR you may as well do the forged pistons, possibly rods, fully balanced new harmonic balancer etc in case you decide you want to rev it to 8000 and make 500kw down the track.

I really wouldn't want a lot more power than what I have now. I reckon the off boost power of the 30 would make it so much better than the 26.

Mid to high 300's would be as driveable as a low 400's 26.

Happy to stand corrected!

Anyone shot preened/prepped standard rods making big power?

Where can you get them for this price?

I agree, you might get just the plate for that price but not plate, bolts, modified pickup, etc.

If I'm wrong please supply the link!

I agree, you might get just the plate for that price but not plate, bolts, modified pickup, etc.

If I'm wrong please supply the link!

Where can you get them for this price?

Sorry guys - seems I got mine at mates rates - my engine builder only makes them for his own engines - says he doesn't have time to make them for general sales.
  • 3 weeks later...

Im intetested to know the answer to turbodragons question about eego in vic... additionally if anyone kbows about legality/roadworthyness of the conversion in qld i would be interested to know as im moving there down the track.

Not 100% sure. With parts,labour and machining.

Well over $10k

all comes back to what u want done, but i was quoted 150$/ph labor in machining such as moving tensioner, fitting oil crank collar and any modding of the head and block...

i put some of my prices below to give you an idea, i get a lot of discount stuff because my machine shop has an account with the company i buy my performance stuff from.. and this is for a 25/30

RB30 $free

Pistons $1280 (JE pistons with CR 8.7:1)

Rods $587 (spool RB30 rods)

Sump GTR $190 (second hand nissan)

Head gasket $230 (cometic)

Gaskets $302 (genuine from NISSAN)

Bearings $111 (ACL race series)

Main bolts $157 (ARP)

Head bolts $150 (ARP)

Machining 5-10 hours labor possibly more..

Tensioners $234 (Nissan)

Studs for tensioners $60 (KUDOS motorsport)

Timing belt yet to buy

my complete total is over 17k, with the above + turbo manifold inj plenum etc etc... i have not paid a cent in machining but if i had i can guarantee it would be well over 17k by now im sure if you look around and that you can get alot of stuff for cheaper and so on good luck with it all, and what ever you can get away with and do your self go for it, as it all adds up in the long run..

Edited by tazzy

Sorry guys - seems I got mine at mates rates - my engine builder only makes them for his own engines - says he doesn't have time to make them for general sales.

Right here's one:

http://www.trademe.co.nz/motors/car-parts-accessories/nissan/engines/auction-519855036.htm

Its not as easy as you think to build an engine and do a"cost analysis" and stick to it.

What happens when you take your head to the machine shop and it needs new valve guides and seats or its cracked?

If you're looking for ways to save money here and there, forget building an engine FULL STOP.

Do it once and do it right or don't do it at all.

But like NYTSKY said take your budget and double it then you may be close to the final figure.

Another thing I think you missed in your costs is assembly and all the double and triple checking clearances.

This costs money too.

This is assuming you're not assembling it.

But if you are assembling it you can just go and slap it together but don't be surprised if it fails shortly after its finished.

Don't trust any thing anyone tells you, check every clearance 10 times yourself to be sure and if its not right take it back and get it fixed.

Lastly $500 in machining? Double that and more including a head service.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...