Jump to content
SAU Community

Recommended Posts

6809664816_71177637cb_z.jpg

We know everyone loves a good cruise, so thanks to your events organiser yours truly, after a few months of neglecting my events job, we're going on one again.

CAMS permit: SAU30092012 permit Sep 12.pdf

Okay so here's the details;

Date: Sunday 30th Sep 2012

Who: Anyone with any car (doesn't have to be a Skyline) but Skylines prefered laugh.gif

We're taking a nice cruise from Kirrawee down to Headlands Hotel in Austinmer.

From where? Well we're meeting up at 10AM, for a 10:30AM Sharp leave, at the parking lot near the corner of Waratah St and Bath Road in Kirrawee, up the road from Just Jap..

Where to then? Well, we head left out of that carpark to Toronto Parade, turn left, and follow this down to the Princes Highway.

After travelling down to the Princes Highway, we hang a right heading for the Royal National Park turn off at Sutherland.

post-31588-1285839628_thumb.jpg

As we near the National Park at Sutherland, we need to turn left down Farnell Ave. Once we turn here, there will be a bit of room on the left where we can pull over and get everyone to bunch back up.

post-31588-1285839620_thumb.jpg

As we head into the Royal National Park, we'll be informing the "Gatesmen" that we are not stopping in the National Park and travelling through to Wollongong. (Which we are, into a northern Suburb of Wollongong). This means we don't have to pay to go through.

From here we just shoot through the Royal National Park and pop out down the bottom at Bald Hill.

After Bald Hill, we will be taking the left turn down Lawrence Hargrave Drive.

post-31588-1285839636_thumb.jpg

We will follow Lawrence Hargrave Drive down until Headlands Ave, at which point we will turn left, and pull into the carpark at Headlands Hotel.

post-31588-1285839609_thumb.jpg

Now this hotel does have some "Down Under Hollywood Class", being the main on-site filming location for the Australian Show headLand

There is plenty of park land around the Hotel, and after a bit of a feed, I will be proposing a bit more socialising and some fun activities like photos and stuffs (Weather permitting)

If the weather does fault, then we'll just stay inside, have our chats, and shoot some pool.

On this cruise we will ALL be sticking to the speed limit.

There will be NO DRIFTING.

NO BURNOUTS

NOTHING ILLEGAL!

We will be the most courteous users on the road, and we will not be doing ANYTHING to cause any disrepute for the club.

As with all SAU:NSW events, this cruise will run under a CAMS permit.

This will be another fun day, with the only cost a bit of fuel, and what ever you decide to eat and drink.

For those of you who decide you need more than one or two during the afternoon, please organise a safe way home.

On this cruise we will ALL be sticking to the speed limit.

There will be NO DRIFTING.

NO BURNOUTS

NOTHING ILLEGAL!

Looking forward to seeing you guys there!

BRING A FULL TANK OF FUEL!!!!

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

Yeah, if it's closed, just keep heading down to Towradgi Beach Hotel - map link from Austi Pub to Towradgi Beach Hotel as follows:

https://maps.google....=1,0&sz=17&z=13

Awesome pub that one,real nice beer garden and good grub. :yes:

Hey, yeah headlands hotel is definitely closed down. Everyone should head down 3 mins south the famous Thirroul Beaches pub! I use to live down that way and it was a great place for events such as this.

I've referred 2 ladies to come along in their white V35. Please make them welcome? They've never been on an SAU event before.

Cheers

Will do Terry, more the merrier, will try and get my uncle to bring his V35 out so they arnt the only ones in V35s

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...