Jump to content
SAU Community

Recommended Posts

Hi,

STANDARD FUEL CAPS. I don't think mine is the right one. Even though it says Nissan on it, it doesn't seem to keep pressure in the tank at all.

I have determined this from not hearing any 'pshhhhhhhhhh..' sound when I undo the cap. I swapped over the cap with my mum's S13 Silvia, and still no 'built-up-pressure' sound at the petrol station.

Also, if the conditions are 'right', I can see that hazy petrol 'vapour' pouring from the fuel flap, and sometimes the smell inside the cabin is quite bad, (girlfriend hates it...I do too). I am wondering if this could be causing the smell inside my car. All else looks OK, no leaks..etc. Cars performance seems ok (seems!!!).

I know the car has been involved in a 'rear' accident in Japan. (How bad? ...Don't know)

Is there an 'identifier' on the cap that clearly states it to be R33 specific?

Thanks,

Mark.

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

please keep responses coming....I need a definate answer for this one...I'm loosing brain cells thru the fumes!! I'm sure it's got something to do with the cap, and maybe 'blow-back'.

thanx!!

mine is the same, the r33 cap on my car has holes on it if you detatch the cap part from the screw in part...(lol hard to explain) There are holes in the screw in part which i imagine vent out pressure, why I dont know, you can buy new ones from workshops or websites though and im sure it will fix your problem.

mine is the same, the r33 cap on my car has holes on it if you detatch the cap part from the screw in part...(lol hard to explain) There are holes in the screw in part which i imagine vent out pressure, why I dont know, you can buy new ones from workshops or websites though and im sure it will fix your problem.

Jimbo seems to have the right noise... I know my cap works on the S13 Silvia, but not the other way around. (by working I actually mean making the pressure noise on unscrewing)

Surely there must be some consistancy here?

Thanx 33NIZ,

Mark

please keep responses coming....I need a definate answer for this one...I'm loosing brain cells thru the fumes!! I'm sure it's got something to do with the cap, and maybe 'blow-back'.

thanx!!

All Nissan fuel caps are (should?) be the same. Hence you can buy a "Nismo" branded fuel cap and it will fit on any Nissan.

This also makes mass production of the part cheaper which makes sense.

My cap does not make a pressure release type noise and I do not smell any fuel vapour inside the car.

All Nissan fuel caps are (should?) be the same. Hence you can buy a "Nismo" branded fuel cap and it will fit on any Nissan.

This also makes mass production of the part cheaper which makes sense.

My cap does not make a pressure release type noise and I do not smell any fuel vapour inside the car.

Thanx SEWID...

Production technique Seems Logical, inconsistency in other's standard fuel cap's isn't.

Ta.

it's not the actual plastic cap, but the hunk of metal the cap srews into, was not sealed when it was changed over at compliance...

u have to get one the right size, and then seal it somehow... dont use silicone though.

AH HAH!!!..........now that u mention it Z, my filler spout does look new (and dodgy) and aftermarket.

..........mmmmmmmmmmmm

WOT 2 DO ???????

Thanx sooo much Zahos!!

Keep em coming in everyone!!!!!!!!! this is interesting stuff...starting to make sense a little....

OK well I think i have the answer. My car leaks out vapour and does no have the schweppes pshhhhhh sound. But I looked at my mates cap which works properly and the difference was a real thin rubber ring which I remember taking off the fuel cap cause it had already half fallen off when i first bought the car.

OK well I think i have the answer. My car leaks out vapour and does no have the schweppes pshhhhhh sound. But I looked at my mates cap which works properly and the difference was a real thin rubber ring which I remember taking off the fuel cap cause it had already half fallen off when i first bought the car.

thanx CR33

Do u think that pressure, or lack there of, can create performance problems in the fuel delivery department, or compromise safety at all?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...