Jump to content
SAU Community

Recommended Posts

Wrecking Gunmetal Grey coloured R32 Gtr.

Heaps of parts, first in with the cash wins it.....

Rb26dett long motor $2,100

Speco tacho $60

Gearbox $500 incl shifter. Gearbox crossmember $50

Front mount intercooler (stock) $100

G sensor $150 (not red)

Tailshaft $100

Stock clutch in very good condition $200

Diff $500

Rear cradle (bare) $100

Hubs $100 per hub, front includes uprights

Front lower control arms $80 pair

Front cradle (bare) $100

Front and rear sway bars $80 each

Front steering rack $150

Rear steering rack (incl rack ends) $150

Brake booster $100

Exhaust manifolds $40

Dump pipes $40

Front pipe (stock) $50

Carbon canister $30

A/c compressor $80

washer bottles $20 each

Throttle cable $80

Bonnet release cable $50

Drivers side headlight $100

Bonnet liner/heat shield $30

Rear bar reo $150

Doors $150 each

Tail lights $50 each

Steering column (plastics, ignition barrel and indicator not included) $50

Steering wheel plastics $40

Speedo cluster $50

Triple gauge cluster $20

Door trims $70 each

IMG_8868-1.jpg

IMG_0366-1.jpg

$10 bin:

-Footrest

-Interior roof light- centre

-Interior front map light

-Kick panels ($10 each)

-Boot plastic trim (bit around the lock striker)

-Door sill plastics (bit with Skyline written on it) ($10 each)

-Maroon passenger door handle

-White drivers door handle

-Various seat parts 10 bux a piece

IMG_6817.jpg

There are stacks of other parts and trims I haven't yet listed, just ask. I'll be updating and adding new stuff as I get to taking photos and sorting it so check the last few posts for current lists of what's left and what's sold.

Pick up Valley Heights Sydney or happy to post most things, but not all.

Pete

Link to comment
https://www.sau.com.au/forums/topic/410937-wrecking-r32-gtr-stocker-sydney/
Share on other sites

  • Replies 148
  • Created
  • Last Reply

Top Posters In This Topic

I'm guessing you have most of the interior bits fatz?

I've got at least 3-4 things that I need but have to way till I'm home to confirm exactly what's broken

Will be home in 3 weeks so hopefully the stuff I need is still available!!

I'm guessing you have most of the interior bits fatz?

I've got at least 3-4 things that I need but have to way till I'm home to confirm exactly what's broken

Will be home in 3 weeks so hopefully the stuff I need is still available!!

Yea have most of the interior bits

Pete, Do you have the fuel tank cap/sender/cradle?

The 32 one is now on my race car

I have a 33 one you can have for 100

They look the same?

Looking for.....

*Stock ECU

*Steering wheel plastics & Steering column plastics if available

*console surround

*Climate control unit

*center console lid

All if still available or at all?

Pick up

Cheers

Looking for.....

*Stock ECU

*Steering wheel plastics & Steering column plastics if available

*console surround

*Climate control unit

*center console lid

All if still available or at all?

Pick up

Cheers

Yep got that stuff, the console lid is off a gtst which I think is the same

ill pm you my number

Pete

The 32 one is now on my race car

I have a 33 one you can have for 100

They look the same?

As long as they are actually the same, I will take it.

PM sent

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...