Jump to content
SAU Community

Recommended Posts

  • Replies 73
  • Created
  • Last Reply

Top Posters In This Topic

UPDATE AND PRICE DROP FOR CHRISSIE:

- High Mount Twin Turbo Kit, complete, 347AWKW.

$1800 $1600

- Upgraded R33 GTR Turbos.

$750 $650

- R33 N1 Rb26 Front diff/Sump, 4.11 ratio, 8000km old, new Redline Lightweight Shockproof gear oil, perfect condition.

$350 $300

- R32/R33 S1 Coilpacks, full set, with mounting frame, 8000km old, P/N: 22433 60U02.

$200 $150

- R32/R33 S1 Coilpacks, full set, P/N: 22433 60U01.

$150 $100

- CAS with mounting bracket.

$200 $100

- R32/R33 S1 RB26/RB20 Ignitor.

$100 $80

- R33 N1 dumps, with heat shields, 8000km old.

$100 each $100 for both or $60 each

- R33 N1 exh manifolds, with heat shields, no cracks, 8000km old, untouched ready for porting.

$50 each $35 ea or $60 for both

- Alternator with tensioner bracket.

$80 $50

- Knock sensors, 8000km old.

$100 for the pair $50 for the pair or $35 each

- Knock sensor, oil press/temp and anciliaries loom.

$30 $20

- O2 sensors, titania, FR and RR.

$100 for the pair $30 for the pair

- Assorted silicone heater/coolant hoses (new, never fitted) and used vaccuum hard pipes.

$80 $50 for the lot or offers for single items

- Water pump pulley.

$20 $10

- Space Saver spare wheel, T125/90D16.

$30 $15

- Oil temp sensor.

$10 $7

- Thermostat housing/Coolant snout (block side) PLUS thermostat.

$50 $25

- FR and RR hotside compressor pipe/adaptor/snout, includes the rear OEM rubber hose.

$50 each $50 for both

- Coilpack loom, excellent condition.

$50 $35

- Air temp and coolant temp sensor.

$20 each $15 each

- Oil pickup.

$30 $10

- 1x RB26 OEM BOV/Recirculation Valve available, with mounting pipe.

$40 $30

- Stock Stagea rear upper camber/control arms, left and right side.

$30 for the pair $20 for both

- Stock Stagea front and rear swaybars. Rear bar comes with stock links.

$30 for the pair $20 for both

ipb.global.registerReputation( 'rep_post_6616073', { domLikeStripId: 'like_post_6616073', app: 'forums', type: 'pid', typeid: '6616073' }, parseInt('') );

  • 2 weeks later...

Hey mate,

Aust post regular parcel is $38 to Townsville.

Total would be $98.

Both manifolds, with heat shields, in perfect condition for under $100 delivered... Absolute bargain.

Cheers,

Pete

  • 2 weeks later...

Hi,

Can you work out the total cost of a RB26 TPS and ignitor to post to 3195 vic please.

pm/call/sms Alex 0433878905 to arrange payment etc.

cheers

PM’s replied… a lot of stuff has been sold so it’s about time for an update…

- High Mount Twin Turbo Kit, gave me 347AWKW.

$1600 ono

- Upgraded R33 GTR Turbos, rebuilt, larger, inconel/steel wheeled, ball bearing CHRA's, 8000km's on them.

$650

- Drift Racing/Bucket seat, black, R34 GT-R style, comes with rails to fit all C34 Stagea (as was fitted to my Stagea), R32, R33, R34 Skylines and probably Silvias too.

$350

- Tein "Type Wagon" adjustable coilovers to suit automatic C34 Stagea (Series I and II), "Low Down Spec Cool Style Master" (love the Jap brands/names for stuff). Fronts have been rebuilt (with genuine Tein seals) and rods re-chromed. Have receipts, not fitted since rebuild (due to sale of car). Rears are still good. Adjustable spring seats, so adjustable in height, damping is fixed valve. Get on these quick!

$750

- R32/R33 S1 Coilpacks, full set, with mounting frame, 8000km old, P/N: 22433 60U02.

$150

- R32/R33 S1 Coilpacks, full set, P/N: 22433 60U01.

$100

- CAS with mounting bracket.

$100

- R33 N1 dumps, with heat shields, 8000km old.

$100 for both or $60 each

- R33 N1 exh manifolds, with heat shields, no cracks, 8000km old, untouched ready for porting.

$35 ea or $60 for both

- Alternator with tensioner bracket.

$50

- O2 sensors, FR and RR.

$30 for the pair

- Space Saver spare wheel, T125/90D16.

$15

- Single pin/blade Oil/water temp sensor.

$7

- Thermostat housing/Coolant snout (block side) PLUS thermostat.

$25

- FR and RR hotside compressor outlet snouts, includes the rear OEM rubber hose.

$50 for both

- Air/coolant temp sensor (OEM, yellow plug).

$15

- Stock Stagea rear upper camber/control arms, left and right side.

$20 for both

  • 3 weeks later...

hey mate,

your RB26 OEM BOV is sold i'm assuming? It will fit onto a 34 GTT right (i've read a few threads who say no problems)? Will take if available. and pics of your bucket seat please? Will pm you email for it. cheers.

Hey Chris,

BOV sold, paid for, waiting to be redelivered (thanks aus post!).

Photos of bucket seat and rails below. Has seat angle adjust via rotary knob, seat fore and aft adjust and quick release hinge forward for rear passengers. Seat angle knob is set up for clearance with centre console/transmission tunnel. Rails are nice and LOW.

IMAG0210_zps1bc6f19a.jpg

IMAG0208_zpsd7a4263d.jpg

IMAG0209_zps268bc635.jpg

Really not interested in trying to freight the seat.

Cheers,

Pete

Thanks Pete. Seat looks great, would definitely consider it but right now need to buy some suspension parts higher on the priority list. Oh and nice we have the same phone =) Good luck with selling it or else i might come back after a while!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must me missing something? 
    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...