Jump to content
SAU Community

Recommended Posts

Troy,

Yeah, as Brendan said, there was one N/A civic on street tyres that was cutting some very nice lines out there, as well as Daniel in his White R33 GTR lapping under in the 1:08s...

Then there was a Race-setup MR2 that seemed to be driving in all the categories, all day :D 1:10s... Not too bad...

Personally I thought that Darren in his 200SX was doing very very well out there, except for his slight tendancy to cook it a little too much into and out of corners :(

great day :)

John will be back with a vengance to re-claim his case of beer I'm sure

Those MR2's are fantastic and if my car was still for sale until the weekend then it certainly wouldn't be now. I can't wait to get mine setup now :(

Check the times in the links I posted Roy.

 

I was impressed with the N/A Honda civic with suspension & brakes - was running very fast lap times.

Thanks Merli for those very clear pics on that mega camera of yours. I think I need some of that Just For Men hair colour stuff.

All I will say ROY lucky the zed stopped or it would have been in there.

Also Roy check the times of a burgundy GTS-T 1 min 12 and it looked relatively tame, very impressive.

Also Roy check the times of a burgundy GTS-T 1 min 12 and it looked relatively tame, very impressive.

I was looking at that... is it std turbo with good rubber/susp/driver???

For Oran Park, i think a certain Zed should be attacked with a holesaw, RIP non structural panels :P

1:20 with compliance tyres for me.  I tried so hard to wear them out but they still have heaps of tread.

I thought those MR2's seemed fast.

I'd say your probably not trying hard enough... come up to Oran Park on Sat and I'll demonstrate how to kill a few sets!

Yeah my car first had blown piping on the cooler then a leak in the exhaust manifold. Should be back on the track next week if I can get the time to fix it.

Was a real shit as I was just getting used to the new suspension and tyres too!

That red gtst was kinda insaine, I think modified cars of that level should be in the race car and gtr group.



  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...