Jump to content
SAU Community

Recommended Posts

hey guys.

I'm looking at getting a turbo timer and i'd always thought they were in the price range around $100, so im a little surprised at the prices i've come across on ebay.

One item particularly is a HKS turbo timer and im wondering if it's fake due to the low cost or if it's a genuine HKS turbo timer and if this would be worth getting.

Another thing im interested in is the turbo timer advertises that it can automatically set perfect idle times for you, im wondering if anyone can validate that this is true?

Also, are turbo timers generic and fit to every car? I need to fit it to a turbo R34.

The item link:

http://www.ebay.com....984.m1423.l2649

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/411770-ebay-turbo-timer/
Share on other sites

I really want to take care of my car and as such i idle it to cool down whenever i've been giving it a bit and even if i haven't i still give it about 30 seconds of idle time.

I'd just rather cut out the time i have to spend waiting for it.

Don't drive like a hoon for the last 5 minutes of your journey. Job done. What about brake temps and every other fluid in the car? ( I know it's not like your diff and box will get extremely hot on the street, but the point still stands)

I am aware it doesn't have any additional benefits to the car, but it prevents me having to sit in the car and leave it idling for a minute.

Which has been annoying many of my mechanically impaired friends who are like 'JUST TURN IT OFF!'

Which has been annoying many of my mechanically impaired friends who are like 'JUST TURN IT OFF!'

They don't sound that impaired unless you've been flogging it. The system is designed to circulate coolant through the turbo after the engine has stopped.

Plus you can't leave it in gear which would suck on a hill and probably annoys your neighbours if it had a loud exhaust. Save your money!

I read in the owner manual that if you have been driving over 80km/h for a long time, you should give it about 1 minute.

if 100km/h u should give it 2 minutes.

something like, heavy boosting and hard time, 5 minutes.

+1 to all the above.

I got one against all advice back when I first turbocharged my car. If I could go back, I'd flick myself in the nut for it. They're farkin annoying. Honestly, I've got a genuine Apexi one and if I could be bothered removing it, I'd give it to you 100% free.

Edited by Hanaldo

I read in the owner manual that if you have been driving over 80km/h for a long time, you should give it about 1 minute.

if 100km/h u should give it 2 minutes.

something like, heavy boosting and hard time, 5 minutes.

Show me this.

a few minutes of insurance wont hurt it, i use mine when its cold too, set it to 3mins idle, what happens when the mechanic flogs it and then turns it off at the garage?

Edited by SliverS2

Hanaldo, it's in a printed off owners manual that came with the car.

But it's 100% in there, the minutes might be incorrect, but definitely has an idling time for 80km/h, 100km/h and something else such as 100+

a few minutes of insurance wont hurt it, i use mine when its cold too, set it to 3mins idle, what happens when the mechanic flogs it and then turns it off at the garage?

Get a mechanic you trust or do it yourself.

a few minutes of insurance wont hurt it, i use mine when its cold too, set it to 3mins idle, what happens when the mechanic flogs it and then turns it off at the garage?

Don't take it to a mechanic :P Or get an ecu where you can set the rev limit yourself ;)

Seriously though, why do people like to idle their car so much? Engines don't operate efficiently when they are idling.

Yeah I bought one off eBay for my mate. Turned out to be fake, wouldn't trust ebay items for that price just grab one from a legitimate site.

I have one in my car, doesn't hurt to have one, got mine form hi octane for about $100.

Yeah I bought one off eBay for my mate. Turned out to be fake, wouldn't trust ebay items for that price just grab one from a legitimate site.

I have one in my car, doesn't hurt to have one, got mine form hi octane for about $100.

Yeh this isn't really correct. Aside from it being yet another thing that can go wrong, you guys do know that idling isn't good for your car yeh? I mean yes, idling for 30 seconds to cool it down isn't going to kill the motor. But it isn't saving it either. It's doing nothing good, which means the tiny bit of bad that it does makes it a bad idea.

But hey, I digress. Here I am preaching about it while mine is still in my car, albeit NOT FARKIN WORKING.

Edited by Hanaldo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...