Jump to content
SAU Community

Recommended Posts

Is there a backlog for the approvals in "Projects, Overhauls and Build-ups" section?

Maybe the mod for the section is on a break?

I put up a new project over a week ago and hasn't popped up yet and the most recent approved project I can find was from about a fortnight ago.

Or did my thread mearly get turfed? :wacko:

Cheers

Joel had the same issue recently, it took some time to get approved but it went through and was worth the wait!.... I assume with the mods working hard on the Nationals etc there is just a lot to do :)

Look forward to your build thread :yes:

yep - mods are extemely busy at the moment due to nationals was the answer i got.

Be pateint or pm a supermod if you see one online - Ash was nice enough to approve mine (thanks again ash :-)

Edited by wedge_r34gtr

OK, significant backlog cleared, let me know if some have been missed.

Also, the best way to chase up an unapproved thread is to contact the section moderators first: N1GTR, Col-GTSX. Or another way is the "report this post" link which also goes to the section moderators....best way to spread the workload across the volunteer mods

  • 5 months later...

No, the problem is there is no thread started by you in either the build or motorsport build section. Not sure what happened but there is nothing there to approve. If you are concerned about the post just do a short intro in the first post and then once approved you can add more info.

Mate, I'm stuffed if I know what is happening....but there is no queued thread by you in motorsport builds from the last 2 days.

Can you start the topic somewhere else and send me a link, I will move it over to Builds

umm yep, you can't edit a post more than a couple of minutes after when you post it; we had to introduce that a few years ago to deal with dodgy trading.

I've removed that first line now too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...