Jump to content
SAU Community

Recommended Posts

Does that mean if I'm the secretary for a dentist I can start performing root canals?

My point was that if you look around its possible. I had no idea my case was an exception to the rule, but I'd be willing to bet if it was as easy as it was for me it wasn't a one off, so look around until you find someone at a decent rate who's prepared to offer what you need.

if you're a qualified dentist, sure. As a qualified finance broker, I assume I can comment on such things. In order to service our brokers I need to know all aspects of the industry inside out.

I never said it was impossible, but rather said your deal was the exception to the rule.

Edited by Cowboy1600

I know another Credit U. who'll give a secured loan on a 7 yr old car.

So in addition to Ryan, is this exception #2?

It's still not the rule.

Seven years is still out of the norm, but not unheard of. Eleven years is very, very unusual. Even the PCU website says they'll go to five, so for them to negotiate to eleven is odd.

I'm sure you can find more, too. Are you aware of how many lenders there are out there?

Oh, also, did you check the comp. rate on the Greater Building Society? It's 16.41%pa. That's credit card territory. It's fine to say they'll secure it for older cars, but if that means you're paying worse than unsecured credit card or personal loan rates, then it's all a bit pointless, don't you think?

EDIT: Actually, to correct the above you can get 11.19% on cars up to 10 years old. That's pretty good. 10 years is still odd. And I can get 11.95% through a major at the moment for unsecured personal loan.

Edited by Cowboy1600

5-7 years is standard play. Any longer and the interest rates start to creep up. Also, being that its secured, if you do go with a smaller institution and they go bust (banksia), administrators can legally ask for all remaining within 30-60 days.

Welcome Steph.

Do your folks have a mortgage + you have an income + you're trustworthy?

If so, you can obtain a loan at low interest on your car if your folks take ownership of the car whilst you pay it off, and they consolidate the car with the home loan.

When I was about 8,...

I said to Dad, "Mum says that you might loan me some money for my Matchbox car collection - please?"

Dad:- "I might if you give me security on the loan."

Me:- "What's security Dad?"

Dad:- "It's when I've got you by the short 'n curleys."

Me:- "What's short 'n curleys?"

Dad:- "You'll know in 5 years."

hahahahaha Terry!!!

I couldn't agree more with you. Steph you're pretty much up sh!t creek for options. When I got my first skyline I looked into all the options I had being a uni student and working part time. I also had the same trouble you're having with the secured loan, so the bank told me to either borrow extra on my parents mortgage (they didn't have one though this option went out the window) or get an unsecured loan - the commonwealth bank told me they would be happy to loan me the money at 18.6% p.a........Yep, I know, I told them to go stick it and went and found myself another job to buy my baby :O

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...