Jump to content
SAU Community

Recommended Posts

Wish I recognized the car and came said hello at the SAU Nats. Loving the results coming out of this community lately it's insane.

Makes me want to push 11ty boost into my little turbo till it runs out of puff

This is true, alot of big horse power cars kicking around now, especially in sydney...

hey Joey, what cat you running? may have missed it...

4" exhaust?

Hi Dan, exhuast is tapered out from the back of the turbo to a 4 inch all the way to the cat and including the cat. The rest is 3.5inch

The cat is a "high flow" cat :)

Good to hear Nick,

just remember that the turbo is going to sit very high.. especially on a 30 block

I have a bit of room to spare even with the extra deck height. Out of interest have you guys seen any precision results bettering the usual garrett options or is it still just hype? I keep looking for reasons to change but there are precious few results.

Interesting to see how this goes.

More specific details of the setup?

The details are in the build thread but it's basically a std stroke built 30, 26 head with big'ish cams, full race 'power' manifold and all the supporting stuff.

Out of interest have you guys seen any precision results bettering the usual garrett options or is it still just hype? I keep looking for reasons to change but there are precious few results.

From what I have seen they usually come up with a bit better results that the Garrett equivalent. Nothing earth shattering but a little. I think the big test for me will be my GTR on a dyno that has a lot of other results on file to compare with :)

Edited by SimonR32

Well after seeing the power it made on pump on low boost (around 375rwkw) i would have thought it would have made more power...

but by the time we played with the cam gears and got boost coming on nice and early we lost that little bit up top

at the end of the day the front fan is only 60mm and for it to make that power with that kind of response, i couldnt have asked for much more really :)

Absolutely, hardly a disappointing number considering the spool and the price of the turbo - just advertising would suggest that it will match or beat the performance of a GT3582R but it looks a bit more like it is more or less comparable with but definitely not likely to outperform. Again, no shame in that for something not much over half the price that looks and sounds awesome :D

  • Like 1

From what I have seen they usually come up with a bit better results that the Garrett equivalent. Nothing earth shattering but a little. I think the big test for me will be my GTR on a dyno that has a lot of other results on file to compare with :)

That will be interesting, is that likely to happen? An outfit I know is doing a Precision PT6766 and a Forced Performance GT3794R HTA on the otherwise equivalent setup car - an 4G63 unfortunately, but should give a general idea. Will be interesting to see if the Precision turbos are matching the performance of the HTAs.

That will be interesting, is that likely to happen? An outfit I know is doing a Precision PT6766 and a Forced Performance GT3794R HTA on the otherwise equivalent setup car - an 4G63 unfortunately, but should give a general idea. Will be interesting to see if the Precision turbos are matching the performance of the HTAs.

I don't think they have done any HTA's but millions of GT3582R, GTX3582R and T04Z's etc

Here's a video of Joey's car at the Dyno Day yesterday. I think he mentioned it was running about E60.

Sound isn't great but at least it doesn't blow out too bad. Best to click HD and watch it that way (I uploaded a full 1080HD version but even Vimeo trims it down to 720).

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...