Jump to content
SAU Community

Recommended Posts

THE RESULTS ARE IN!!!!!!

After driving my car around with 260rwkws (stock ecu/turbos) for three months, the hunger for more power was unbareable, so I went on the costly journey a lot of GTR owners decide to take....

My car has finally undergone the turbo upgrade, and after much deliberation decided to go for the Trust T517Z turbo kit. These turbos were chosen as everyone opts for the HKS 2530s, so I decided to be different and more importantly wanted to see the difference between the two, mainly POWER, RESPONSE, LAG...

These are the performance modifications undergone with the upgrade:

- Power FC

- Nismo AFM x2

- Trust Fuel Rail

- Trust 720cc Injectors

- SARD Fuel Pressure Regulator

- Trust T517Z 8cm2 turbos x2

- Bosch 044 Fuel Pump

- HKS EVC4 Boost Controller

- Custom Catch Can

- Daiken Exedy Twin Plate Clutch (converted to push type)

On the dyno the car pumped out 324 rwkws at 20psi (1.3bar). I was very happy with the result, but noticed that car was much laggier which was expected.... However when full boost hits (around 4800rpm), u can't help but smile!!!!!

In the next couple of weeks, there will be a comparison between my car and Simon's car (meshmesh) who has the exact modifications except HKS 2530 turbo kit.... The comparison will be done on the same dyno, same day....

Anyway heres the dyno sheet:

(NOTE: This was NOT done in 'SHOOTOUT MODE')

http://www.meggala.com/T517Za.gif

P.S Big thanx to Gerald and Nigel at Ice Performance!!!!!

And BIG THANX to Steve aka meggala!!!!!

Link to comment
https://www.sau.com.au/forums/topic/41542-dyno-result-t517zs-on-gtr/
Share on other sites

  • Replies 136
  • Created
  • Last Reply

Top Posters In This Topic

intresting dude, thanx for posting, maybe try cam gears as well those turbos are supposed to have bugger all lag compared to the 2530's, good luck.

THE RESULTS ARE IN!!!!!!

After driving my car around with 260rwkws (stock ecu/turbos) for three months, the hunger for more power was unbareable, so I went on the costly journey a lot of GTR owners decide to take....

My car has finally undergone the turbo upgrade, and after much deliberation decided to go for the Trust T517Z turbo kit. These turbos were chosen as everyone opts for the HKS 2530s, so I decided to be different and more importantly wanted to see the difference between the two, mainly POWER, RESPONSE, LAG...

These are the performance modifications undergone with the upgrade:

- Power FC

- Nismo AFM x2

- Trust Fuel Rail

- Trust 720cc Injectors

- SARD Fuel Pressure Regulator

- Trust T517Z 10cm2 turbos x2

- Bosch 044 Fuel Pump

- HKS EVC4 Boost Controller

- Custom Catch Can

- Daiken Exedy Twin Plate Clutch (converted to push type)

On the dyno the car pumped out 324 rwkws at 20psi (1.3bar). I was very happy with the result, but noticed that car was much laggier which was expected.... However when full boost hits (around 4800rpm), u can't help but smile!!!!!

In the next couple of weeks, there will be a comparison between my car and Simon's car (meshmesh) who has the exact modifications except HKS 2530 turbo kit.... The comparison will be done on the same dyno, same day....

Anyway heres the dyno sheet:

(NOTE: This was NOT done in 'SHOOTOUT MODE')

http://www.meggala.com/T517Za.gif

P.S Big thanx to Gerald and Nigel at Ice Performance!!!!!

And BIG THANX to Steve aka meggala!!!!!

Hey Jack... either way you gotta be happy :rofl:. The boys were always pretty confident about your car making the power..no probs. I think it was only a concern about lag?? But by what you say @4800~rpm, that sounds about the same as mine. I tried to do an overlay of your dyno that you emailed me against mine, but the Kmh per hours are set differently, and I think you'll find that yours is not that laggy after all, in comparison my 2530's set up.

Hopefully my friggin clutch arrives next week. :rofl: once it does, we'll organise a day with the boys on the dyno.

Tribex.. I think Jack does have cam gear?? he can confirm, also jack did you end up putting some lightened pulleys? If so do you notice any difference?

Well done.

I'm curious, what did you make at 1 bar? what are these turbos equivilant too? are you running stock internals?

for cost of the PFC and Nismo AFM's I mite recommend the Wolf3d V4 which will also give you boost control and allow you to run a MAP table. Overall a very nice result can you do a run in shootout mode so I can compare my figures to yours?

my chart can be found here http://summoner.perthstreetcars.net/Cefiro...o/mark_dyno.JPG and this was done in shootout at 1 bar.

tribex- yes your right, they are meant to be less laggier than 2530s, but in the 8cm2 version, mine are the 10cm2 version so maybe that's why they are laggier?? Dunno...

Yes I have Trust cam gears....

Doughboy- standard cams, standard headgasket...

meshmesh- yeah full boost is around 5000rpm, getting used to the lag now!!!! As far as the Trust pulley kit, not sure if it made a difference....

rev210- yeah saw that thread, these turbos are apparently capable of 2 bar, don't know about reliability.... my car gets driven on weekends only, so doesn't clock up the k's....

summoner- I'm not sure what the car makes at 1bar, pretty useless running at 1 bar might aswell stay with stock turbos...

These turbos are equivalent to HKS 2530s rated at 600hp for both of them...

Yes running stock internals....

Didn't want to use anything but Power FC, personal preference....

Will do a readout in shootout mode in a couple of weeks when we do the comparison between my car and Simon's (meshmesh)... STAY TUNED!!!! By the way what turbos you running???

Don't think itas tailing off that much, feels very strong.... will have to check it out next time...

for cost of the PFC and Nismo AFM's I mite recommend the Wolf3d V4 which will also give you boost control and allow you to run a MAP table.

Summoner - you should know the rules by now! It's not permitted to use Wolf on GTRs in the Eastern States! :jk:

hope you got $'s for a spare engine then cause you'll need it.

We limited mine to 1bar boost and its running stupidly rich(fouls up plugs) so going to have to drop it down to maybe 12psi and cleantune up. Over 450rwhp and imho you are risking the engine.

My turbo's are equivilant to around hi flo 2540's... Efficiency is the key

I may not know the intricacies of tuning, but wtf has boost got to do with running rich/lean? Sounds more like your tuner hasn't got his fuel mapping correct than whether you're running too much boost...

I'm running 2530s at 19psi and my AFR is sitting dead on 12.0, I don't know why you'd want to run these turbos at a lower boost pressure than that.

Great figures without cams - I did a fair bit of reading on these Trust turbos and found alot of overseas people (UK) had major problems with longevity.

Trust may well have fixed this problem but if they havent I understand the following is the go:

1. upgraded thrust bearing

2. Oil cooler to reduce temps as they are oil cooled

3. hope for the best

Not wanting to appear pessemistic just what I have herd.

Jeremy

summoner & jezzzr, that's the first time I've heard such claims about the trust kits. At the same time, I'm taking it with a grain of salt, mainly because one of AU's most respected gtr builders Ben from racepace recommended these and infact built Ph1's GTR also with the Trust turbo's. Ph1 is pushing around 350rwk with these turbo's, and I am yet to hear he has any problems, perhaps he can confirm. Finally, don't get me wrong, but the pommies aren't exactly as upto date with GTR as AU are they??, and their not the most talented when it comes to engineering, tuning either...

I hope I am wrong (or rather what I read was wrong) because I will be getting a pair of these turbos if they are as durable as HKS/Garett etc, they clearly make great power. The thread that put me off is:

http://www.gtr.co.uk/forum/upload/showthre...ead.php?t=21242

Its worth a read - UK may be behind us but theyve been using these trust turbos for a while.

Jeremy

Congrats on the results!! sounds like a very nice package :(

As for the turbo's longevity, i've never heard of anyone out here having trouble with them at all. Pete at advan backs them to the hilt, reckons they're the best bolt on low mounts along with 2530's.

It's funny there not having that problem in japan. Maybe they don't like english weather haha :headspin:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...