Jump to content
SAU Community

Recommended Posts

Hi Guys,

i have been searching around for info on which way to go when it comes to upgrading the ECU on a R33 GTS-t manual.

can anyone shed their knowlege when it comes to upgrades as i am sure there are plenty of people asking the same question.

it seems to be the big question between

-NISTUNE

-Apexi Power FC

-Haltech Platinum Pro

-Vipec v44

i know price is a major factor, but is there substacial benifits of each ECU?

thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/416039-r33-gts-t-ecu-upgrade/
Share on other sites

Exactly the same boat that I've been in. Going to ring my tuner and see what their most comfortable with as we all know an ECU is as only good as the tune/tuner. But I'm leaning towards vipec, allows duel fuel maps (E85/98) and also MAF/map tunes.

Exactly the same boat that I've been in. Going to ring my tuner and see what their most comfortable with as we all know an ECU is as only good as the tune/tuner. But I'm leaning towards vipec, allows duel fuel maps (E85/98) and also MAF/map tunes.

Do exactly this

Ask your tuner and see what he recommends because an ecu is only as good as the tuner

The other factor is how much you want to remain undercover. Nistune keeps standard ECU and EFM. Looks and works like it's supposed to and could save your bacon when the bacon are perusing through your car. Aftermarket plugins that hide inside a factory ECU case are the next best, but take a lot of extra effort (and a faked up AFM) to camouflage to an equivalent level.

My comment on "ask your tuner" is that a good tuner should be able to handle pretty much any ECU that uses laptop software or a hand controller. It only takes my tuner an extra couple of hours to tune a car for the first time when it's something that he's never seen before (and that happens rarely enough these days) and he wouldn't think of charging the customer for that time. It's his self education investment.

Same guy is so sick of bullshit Haltech failures that he will still tune them, but will not help anyone to install one.

The other factor is how much you want to remain undercover. Nistune keeps standard ECU and EFM. Looks and works like it's supposed to and could save your bacon when the bacon are perusing through your car. Aftermarket plugins that hide inside a factory ECU case are the next best, but take a lot of extra effort (and a faked up AFM) to camouflage to an equivalent level.

My comment on "ask your tuner" is that a good tuner should be able to handle pretty much any ECU that uses laptop software or a hand controller. It only takes my tuner an extra couple of hours to tune a car for the first time when it's something that he's never seen before (and that happens rarely enough these days) and he wouldn't think of charging the customer for that time. It's his self education investment.

Same guy is so sick of bullshit Haltech failures that he will still tune them, but will not help anyone to install one.

My tuner is so used to tuning power fc's that a complete new tune with different injectors,afm,turbo etc etc.. he got the car running reasonable within 5minutes, and on the dyno took no more than an hour then some small adjustments for half an hour..

in comparison the first tuner i used had it on the dyno for upto 4hours, another tuner asked me for the instruction manual WTF?? so i never used them, lol

Exactly the same boat that I've been in. Going to ring my tuner and see what their most comfortable with as we all know an ECU is as only good as the tune/tuner. But I'm leaning towards vipec, allows duel fuel maps (E85/98) and also MAF/map tunes.

Also LINK.

I'd go Nistune on a 8-bit Z32 ECU. I've got one myself. If your tuner doesn't know Nistune I'd be suspicious. However the Z32 into R33 requires more than basic knowledge to work correctly (remove knock sensor, fuel temp resistor, etc).

This has been done to death. In the end you're going to get LOADS of mixed responses because everyone is going to recommend what they have experience with (flying the Link flag myself) and you're not going to be any closer to an answer.

Best way is to just call up your tuner, see if he has a problem tuning any of the ones you are thinking of getting (mine couldn't care less), then do your reading on each one and see which one appeals to you the most. I ended up going with the Link because it ticked all the boxes I wanted and I could get it cheaper than a Vipec even though they are essentially the same thing (some will claim they are exactly the same thing, just different labels).

Also LINK.

I'd go Nistune on a 8-bit Z32 ECU. I've got one myself. If your tuner doesn't know Nistune I'd be suspicious. However the Z32 into R33 requires more than basic knowledge to work correctly (remove knock sensor, fuel temp resistor, etc).

Yeah I thought of nistune it'd certainly be the most economical on purchase price. But from my understanding (haven't done a tonne of reading yet so don't flame me) you are fairly limited on a Nistune compared to stand alone ECU's?

Limited yes. Limited to what the factory ECU can do - which is run the engine fairly bloody well. But if you want a bunch of aux outputs or tricky rev limits or boost control or dual maps etc etc, then you will need something else.

For a normal street car with a few mods (even up to quite serious mods) it will still be a good choice. Just depends on what your plans are.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...