Jump to content
SAU Community

Recommended Posts

Yeah if it has already been painted, there is not much you can do other than colour match it to the car, or buy a new one from Nissan. I personally like the unpainted raw plastic lips. But i guess that is all personal preference.

Yeah..... I agree with you. I prefer the original unpainted look too but I need to be disciplined with this car. I can't justify spending another $350.00 with no return. I'd rather put that money towards the painting of the wheels.

Bob.

I was lucky enough with my last car to have Duncan swap over the dash for me as the original had the treaded bubble.

Horrible job...... Like one big jigsaw puzzle.

I made sure I wasn't going to buy a car with the bubble this time. It was a deal breaker for me.

Bob.

  • 2 weeks later...

I just saw it on Carsales Bob, it was 5 mins down the road, should have called a brother!

Sorry....... Are you referring to the car I bought or another one?

The ad shouldn't be on Carsales........

Bob.

Ok......... A bit of an update.

The car spent a week or so at Unigroup Engineering where Mark and Yavus tidied up the engine bay and tuned the car.

The first and second pic is a before and after of the engine bay.

The next pics are a tidy up of the stereo, dash and gear knob and boot surround.

The last pic shows the car with a set of Ford Falcon BA XR8 17" wheels. The 17" BBS wheels are at the painter getting repainted in the correct colour.

The car has gone to my panel show for all the cosmetic upgrades.

I want it back by the end of next week.

Just have to see how she goes.

Bob.

post-78207-0-14778900-1395730163_thumb.jpg

post-78207-0-13781700-1395730208_thumb.jpg

post-78207-0-76134400-1395730542_thumb.jpg

post-78207-0-03102800-1395730569_thumb.jpg

Looks great! How much did the engine bay tidy up set you back? They did a great job.

I can't specify an exact amount as it's all included in the overall bill.

They powder coated all the engine covers and the top of the radiator including new rocker cover badge.

Replaced all the blue silicon hoses with black ones.

Blacked out the intercooler hard pipe kit.

Swapped out the air box which for another which I had that was in better condition.

Made the OEM boost control solenoid look activated..... Which it isn't.

Then there are all new hoses belts, fluids etc etc........

Bob.

Those rims make my eyes bleed.......but I know its for a greater cause.......

Is that an OEM Radio ?? If so where did you get it??

Cheers

The Baron

Those rims make my eyes bleed.......but I know its for a greater cause.......

Is that an OEM Radio ?? If so where did you get it??

Cheers

The Baron

Yes mate........ Forum member PM'd me and I bought it.

They need a band expander to pick up all our FM channels and double diversity male and female connectors.

With the aerial being in the front screen, the reception can be a bit inconsistent.

It's great to have but I'm tempted to put the ADM Clarion unit in. It was what they fitted to the Aussie delivered cars straight out of the Maxima's.

That way it's period correct and looks stock but works a lot better.

Bob.

Looks good Bob, I'm hoping those wheels are temporary?

LOL........ Yes of course!

I needed something on the car whilst my original wheels are getting repainted.

I can see myself tinkering with these cars for years to come so a spare set of wheels will come in handy.

They only cost me $250.00 complete with tyres.

They are hacked up bad and I felt like a real bogan driving to the panel shop yesterday but these are the sacrifices we need to make.

At least the wheels and body work are being done at the same time with different repairers.

Bob.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
    • Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
    • You just need a different blue slip shop (preferably one you regularly use as a mechanic), and make sure the coil overs are as close as possible to standard height
    • yeah the sugar refining companies were pushing for the same in Oz originally, all fuels were going to have 10% ethanol to make them "cheaper" (noting, that the loss in l/100 might be greater than the decrease in price). I guess they won that fight in Canadia
×
×
  • Create New...