Jump to content
SAU Community

Recommended Posts

Yeah if it has already been painted, there is not much you can do other than colour match it to the car, or buy a new one from Nissan. I personally like the unpainted raw plastic lips. But i guess that is all personal preference.

Yeah..... I agree with you. I prefer the original unpainted look too but I need to be disciplined with this car. I can't justify spending another $350.00 with no return. I'd rather put that money towards the painting of the wheels.

Bob.

I was lucky enough with my last car to have Duncan swap over the dash for me as the original had the treaded bubble.

Horrible job...... Like one big jigsaw puzzle.

I made sure I wasn't going to buy a car with the bubble this time. It was a deal breaker for me.

Bob.

  • 2 weeks later...

I just saw it on Carsales Bob, it was 5 mins down the road, should have called a brother!

Sorry....... Are you referring to the car I bought or another one?

The ad shouldn't be on Carsales........

Bob.

Ok......... A bit of an update.

The car spent a week or so at Unigroup Engineering where Mark and Yavus tidied up the engine bay and tuned the car.

The first and second pic is a before and after of the engine bay.

The next pics are a tidy up of the stereo, dash and gear knob and boot surround.

The last pic shows the car with a set of Ford Falcon BA XR8 17" wheels. The 17" BBS wheels are at the painter getting repainted in the correct colour.

The car has gone to my panel show for all the cosmetic upgrades.

I want it back by the end of next week.

Just have to see how she goes.

Bob.

post-78207-0-14778900-1395730163_thumb.jpg

post-78207-0-13781700-1395730208_thumb.jpg

post-78207-0-76134400-1395730542_thumb.jpg

post-78207-0-03102800-1395730569_thumb.jpg

Looks great! How much did the engine bay tidy up set you back? They did a great job.

I can't specify an exact amount as it's all included in the overall bill.

They powder coated all the engine covers and the top of the radiator including new rocker cover badge.

Replaced all the blue silicon hoses with black ones.

Blacked out the intercooler hard pipe kit.

Swapped out the air box which for another which I had that was in better condition.

Made the OEM boost control solenoid look activated..... Which it isn't.

Then there are all new hoses belts, fluids etc etc........

Bob.

Those rims make my eyes bleed.......but I know its for a greater cause.......

Is that an OEM Radio ?? If so where did you get it??

Cheers

The Baron

Those rims make my eyes bleed.......but I know its for a greater cause.......

Is that an OEM Radio ?? If so where did you get it??

Cheers

The Baron

Yes mate........ Forum member PM'd me and I bought it.

They need a band expander to pick up all our FM channels and double diversity male and female connectors.

With the aerial being in the front screen, the reception can be a bit inconsistent.

It's great to have but I'm tempted to put the ADM Clarion unit in. It was what they fitted to the Aussie delivered cars straight out of the Maxima's.

That way it's period correct and looks stock but works a lot better.

Bob.

Looks good Bob, I'm hoping those wheels are temporary?

LOL........ Yes of course!

I needed something on the car whilst my original wheels are getting repainted.

I can see myself tinkering with these cars for years to come so a spare set of wheels will come in handy.

They only cost me $250.00 complete with tyres.

They are hacked up bad and I felt like a real bogan driving to the panel shop yesterday but these are the sacrifices we need to make.

At least the wheels and body work are being done at the same time with different repairers.

Bob.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...