Jump to content
SAU Community

Recommended Posts

I think it's good value and if I was in the market I'd probably jump on it.

The only thing is to make sure it's a genuine V-Spec 2.

It doesn't take much to add wheels and Brembo brakes.

The spare wheel is yellow and I always thought the V-Specs got the larger black space saver to fit over the bigger brakes, I know mine has.

Yet, both my ADM's have the smaller yellow spares.

The blue ID plate on the fire wall will confirm its legitimacy.

Cheers,

Bob.

Thanks for the tips Bob. Quiet informative there.

BTW my car is a late 94 Model and only came with the yellow space saver not sure it really means much.

Cheers,

Anthony

V Specs IIs Should have a yellow space saver, however they are different to the stock GTR space saver. As mentioned, they are 17 inch and are very bulbous (approx 1 inch wider) to fit over the brembos.

Additionally, they are supposed to have a thick yellow piece of foam (approx 1 inch) that goes on the floor around the rest of the boots floor. This is to raise the floor level up, to the height of the wheel laying on its side. This makes the whole floor flat once the carpet goes on. That foam is apparently very rear and quite sort after in Japan. As over the years, they get thrown away and lost etc. So it is good to see that in the above link, that the car has this foam.

  • Like 1

V Specs IIs Should have a yellow space saver, however they are different to the stock GTR space saver. As mentioned, they are 17 inch and are very bulbous (approx 1 inch wider) to fit over the brembos.

Additionally, they are supposed to have a thick yellow piece of foam (approx 1 inch) that goes on the floor around the rest of the boots floor. This is to raise the floor level up, to the height of the wheel laying on its side. This makes the whole floor flat once the carpet goes on. That foam is apparently very rear and quite sort after in Japan. As over the years, they get thrown away and lost etc. So it is good to see that in the above link, that the car has this foam.

there is usually that foam on import monster....

for around $600 before shipping....

Those photos look good Bob, should turn up really well. One thing that annoys me is the factory paint on the inside edge of the boot that goes all the way around (Forget the name). Would be nice if there was some thicker paint there from factory!

Those photos look good Bob, should turn up really well. One thing that annoys me is the factory paint on the inside edge of the boot that goes all the way around (Forget the name). Would be nice if there was some thicker paint there from factory!

Yep.......... Spoke to my guy about that.

He said he can spray some "dry clear" around the boot lid to replicate the factory OEM look.

  • 4 weeks later...

Bob did they spray the roof and passenger quarter as there no join for the clear to finish at?

No........ They were very clever in the way they blended it into the line on the edge of the roof.

Here are some pics with the addition of factory weld spots replicated perfectly.

Bob.

post-78207-0-06186200-1428284993_thumb.jpg

post-78207-0-75821100-1428285007_thumb.jpg

post-78207-0-23347700-1428285009_thumb.jpg

post-78207-0-98322500-1428285010_thumb.jpg

post-78207-0-52039500-1428285012_thumb.jpg

post-78207-0-83540600-1428285013_thumb.jpg

post-78207-0-88514300-1428285014_thumb.jpg

post-78207-0-26990200-1428285017_thumb.jpg

post-78207-0-48873800-1428285042_thumb.jpg

post-78207-0-48545800-1428285043_thumb.jpg

post-78207-0-30805000-1428285044_thumb.jpg

post-78207-0-24435400-1428285045_thumb.jpg

post-78207-0-17834300-1428285046_thumb.jpg

post-78207-0-65776600-1428285046_thumb.jpg

post-78207-0-70373400-1428285047_thumb.jpg

post-78207-0-90252000-1428285048_thumb.jpg

  • Like 2

Guys, just letting this group know I might soon be putting an EOI out on my VSpec. Half way through building our 1st home and might need to free up some cash. Im not 100% sure as yet, but just thought I would give this group a heads up. Will be doing everything in my power not too obviously ;)

  • Like 1
  • 1 month later...

My vpsec came with the 3 iece side skirts but no n1 front bar. From what I understand any gtr could get nismo extras added when buying the car for extra cost. Mine has the nismo skirts, dump back exhaust and strut braces and all look like they have been there since new

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...