Jump to content
SAU Community

Recommended Posts

My Mechanic has just put in the new clutch and M & S cylinders but when testing the new clutch the pedal box cracked....

he is going to weld it up and put a strengthening bar onto it for now..

Any one upgraded their pedal box lately??

If so what/where/brand would you suggest???

Cheers :)

My Mechanic has just put in the new clutch and M & S cylinders but when testing the new clutch the pedal box cracked....

he is going to weld it up and put a strengthening bar onto it for now..

Any one upgraded their pedal box lately??

If so what/where/brand would you suggest???

Cheers :)

Nismo do a reinforced clutch peddle mount.

GSL are the goods and remsa pads are getting a good rap from them lately

had remsa pads on for over a year now, even used on a track day, awesome street/performance pad

How u finding the dust with the remsa's ?

I find it average, but no worse than any other pad.

After a fairly long hills drive i get a loud screech coming from the front calipers, doesn't make a noise any other time.

Anyone got some good opinions on a comedy show to see while the fringe is on?

This looks good Luke....Habib & Rocky from Fat Pizza are in it.

Me and the missus are checking this one out Sat night with Shane & Co

http://www.adelaidefringe.com.au/fringetix/the-good-the-bad-and-the-ethnic/fc9f7e75-07ba-4784-b3d7-be563fdf5a17

How u finding the dust with the remsa's ?

I actually find brake dust is quite minimal unless you let it build up n don't wash your car for a couple of weeks

As for noises, I hear none. Perfectly quiet, even when cold

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...