Jump to content
SAU Community

Recommended Posts

Alright well yeah closed is Capalaba for E-flex, about 15 mins no big deal. So basically find an ECU that can let me tune it to that fuel, any suggestions?

So e85 is better than 100?

Edited by skyline32sup

Alright well yeah closed is Capalaba for E-flex, about 15 mins no big deal. So basically find an ECU that can let me tune it to that fuel, any suggestions?

Link

Vipec

Haltech

Adaptronic

Not in any specific order of preference, those are just the ones that come to mind.

I think i'll be looking into a haltech from what I've read but we'll see how i go. Thoughts on just getting the tune for E85? I'm sure i can russet up a spot for a jerry can if i run out as said above.

I have bought a turbo setup from a guy off SkylineAus and will be running a Garret 3076 .82 along with 880cc injectors, unknown size of Wastegate most likely 38mm and etc. I've been looking into getting a Greddy plenum as well and also can't decide on Poncams or not.

m

  • 1 month later...

I know its an old topic, but ive since gotten a 3076r, 6boost top mount manifold and tial 38mm wastegate, i plan to get the haltech ecu that has dual fuel systems think its about $2000 and run e85, so would ID1000 injectors be the way to go? is that to over the top for the 98?

I'd say the ID1000s would be about right for that setup, yes - its way more than you need for 98 but you won't suffer any compromises from them either... they will work absolutely fine, and will supply enough fuel to keep the fire going safely on E85 too :)

  • 2 months later...

Figured might aswell bump this, I'm looking at clutches and i'm still a bit vauge on what would be a decent clutch for 300kw for a driven car thoughout the week/track days any suggestions? so it will be be raped and treated nicely lol. Was thinking NPC twin plate but there pricey but then again most twins are aswell, thanks guys!

Edited by skyline32sup

just tossing in my two cents - i got stock 25 with bolt ons running e85 and cracked 315kw - using haltech and 740cc injectors - if i where you get the haltech flex sensor and id1000cc injectors to cover it -

my clutch is slipping and npc has recommend his clutch 800 deliverd and will handle 450kw - and suit street - track and drift.

lot of ppl hve said the excedy is good but not as good on street driving - at this stage i will be going with npc, plus the guys on here recommend them - if i had 2 grand i woluld go the nismo clutch or what ever its called

I've already got my injector setup, running ffp with 850cc sards, was going to go E85 but not now. I'm running a Haltech Plug and Play.

Yeah I'll have to contact them i think about a clutch they seem to be decent for their price

NPC clutch will be the way to go. No need for twin plate at that level. Your crazy not going e85 man. Motor will be so much more reliable on e85. The sard injectors will be fine with e85 for 350kw atw's. Get the the same clutch reese69 described.

NPC clutch will be the way to go. No need for twin plate at that level. Your crazy not going e85 man. Motor will be so much more reliable on e85. The sard injectors will be fine with e85 for 350kw atw's. Get the the same clutch reese69 described.

dont quote me on the clutch lol i havnt got mine yet - but the guys here have said npc or the nismo one which is a massive price difference

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...