Jump to content
SAU Community

Recommended Posts

Well the new rules have been released what’s people thoughts?

http://www.worldtime...013-wtac-rules/

Who’s entering in what classes, apparently my R35 is a supercar now so I can’t enter Clubsprint. Need to rethink my plans now on what I will enter...

Link to comment
https://www.sau.com.au/forums/topic/417668-wta-2013-discussion/
Share on other sites

Ill be entering clubsprint again this year

Me personally I think the rule changes are a good step forward, especially in clubsprint as a few cars were IMO outside the rules

We will just have to wait and see how it turns out!!

I'm not surprised they have to use Yokos.Last year every class of the Yokohama WTAC was won on Hankooks. Not great for the event's naming rights sponsor. They should at least offer a decent discount on their products to entrants though - no mention of that in there...

But what I think is - they are still really crap at writing rules. Not that it really matters because they've never enforced them.

And the weight limits heavily penalise RWD for some strange reason... 1150kg minimum weight for RWD in Open, but a FWD can be 300kg lighter!!! WTF?

I do like that they've reigned in the Clubsprint rules which people were taking severe liberties with. Hopefully the rules are enforced from now on.

Edited by hrd-hr30

All competitors must use Advan tyres?? Surely not!

Lol everyone has to use advan tyres.

If a control tyre is used do you think it will represent a better comparison between cars? Does using only one type of tyre mean that it really will pit engine and chassis against one another on a leveller playing field?

Not saying I necessarily agree with the rules of only using Yokis (which I don't) but something to consider perhaps?

i'll be entering open, assuming that it doesn't fill up in 30sec again.

I think the rules are a good step forward too, but as ben said - only if they're enforced. The changes seem the level the playing field a bit more for guys running smaller budgets (Like me :) ) i think

I find it funny one of the reasons they are going to a control tyre, is because of the 'special' tyres that some teams have allegedly been given when Yokohama were the ones accused of doing it.

Both Yoko and hankook did it

i know a team that were running yokos then switch to the hankooks and gained over a second in lap times

i just hope like already stated that they will be enforcing everything and hope the lap times become about driver and car setup

If a control tyre is used do you think it will represent a better comparison between cars? Does using only one type of tyre mean that it really will pit engine and chassis against one another on a leveller playing field?

Not saying I necessarily agree with the rules of only using Yokis (which I don't) but something to consider perhaps?

I actually enjoyed comparing the times the cars were doing on the different tyres - that's the one thing I was able to personally take away that might help me moving forward...

Agree, a control tyre is great for leveling the playing field to truly determine who has the fastest car on that tyre. However it does nothing for growing the sport and tyre manufacturer development.

Those cars that were sponsored by Hankook, Kuhmo, Bridgestone, Dunlop and Federal are financially disadvantaged if they do not receive the same deal as they were getting before. Are they going to enter now on Advans? Maybe yes and maybe no. If they don't, and there may be some big teams that dont as a result of this, then its the spectator that misses out.

My 2c...

If a control tyre is to be introduced then why not make it a slick like the supertaxis ? We may then see cars out for more than 1 lap per session.

This whole 1 lap shit is doing more damage to the spectators than anything else IMO.

Those cars that were sponsored by Hankook, Kuhmo, Bridgestone, Dunlop and Federal are financially disadvantaged if they do not receive the same deal as they were getting before. Are they going to enter now on Advans? Maybe yes and maybe no. If they don't, and there may be some big teams that dont as a result of this, then its the spectator that misses out.

+11ty

I know if I drove a time attack car that was sponsored by say Toyo, got free R888s and had a big Toyo sign on the side of my car... well I'd be pissed!

My 2c...

If a control tyre is to be introduced then why not make it a slick like the supertaxis ? We may then see cars out for more than 1 lap per session.

This whole 1 lap shit is doing more damage to the spectators than anything else IMO.

But isn't the whole point of the sport "How fast can these guys go on street tyres?" :/

Street tyres for Clubsprint fine, no issues.

But, (and it may not be a tyre thing) I'd personally like to see more laps from the top cars in Pro and Open.

Yes I know the top Time Attack cars aren't built for multiple laps, but even 3 laps per session is better than 1 if it can be achieved somehow...

I find it funny one of the reasons they are going to a control tyre, is because of the 'special' tyres that some teams have allegedly been given when Yokohama were the ones accused of doing it.

Yoko were accused in 2011, Hankook in 2012. Would be better if you had to run a 'marked' tyre supplied by the event organisers. Ie put in your orders before the event and get them at the event and who knows I might end up with Nemo or Cybers tyres??? haha

My 2c...

If a control tyre is to be introduced then why not make it a slick like the supertaxis ? We may then see cars out for more than 1 lap per session.

This whole 1 lap shit is doing more damage to the spectators than anything else IMO.

Yokohama don't bring a slick into aus that I know of.

I wish that Open was limited to 8 tyres. I can't afford 3 sets! Even with endorsements! Still unsure if I'll enter this year... Might have to revise the height of my wing?

My 2c...

If a control tyre is to be introduced then why not make it a slick like the supertaxis ? We may then see cars out for more than 1 lap per session.

This whole 1 lap shit is doing more damage to the spectators than anything else IMO.

Traditional jap time attack doesn't use a slick, I figure. The guys in the states can use the grooved r comps and in the UK is a full slick?

Yoko were accused in 2011, Hankook in 2012. Would be better if you had to run a 'marked' tyre supplied by the event organisers. Ie put in your orders before the event and get them at the event and who knows I might end up with Nemo or Cybers tyres??? haha

Yokohama don't bring a slick into aus that I know of.

I wish that Open was limited to 8 tyres. I can't afford 3 sets! Even with endorsements! Still unsure if I'll enter this year... Might have to revise the height of my wing?

Looks like it, no higher than the roof line.

I love that there is an actual set of rules now (previously more guidelines) it's the natural evolution you can see a lot of time has gone into it and they have consulted some people who know what they are talking about. I think good stuff. Changes are never going to please everyone.

I'm doing club again, I just need more tyre. I can get a 265 on easy, but is that going to be much better than a 255...doubt it.

Need to get a 285, but to do so will be narrowing the track to get wheels to fit....mmmm

Need to get a 285, but to do so will be narrowing the track to get wheels to fit....mmmm

Narrowing track? Outside point will be the same though? track would remain the same. Still run 255 fronts then?

I called Ian Baker to ask about a number of things, including the tyre situation and its potential impact on the event. He said it was ok to post details of the conversation and this is my take on it;

Ian basically said the decision was, not surprisingly, purely commercial. Ian expressed that it costs approx $1m to put on an event like WTAC. Costs such as flying teams over, accommodation, car transport, appearance fees are largely worn by the event of which Yokohama Advan pay a lot of. Those costs are very large and are potentially underestimated by the public. As the major sponsors of WTAC, Advan felt the current return on investment was not great enough. Of large concern, Advan felt the exposure the other tyre manufacturers were receiving as result of the event, far outweighed the investment the other tyre manufactures were making into the event itself, which was nowhere near the investment Advan were making. So ultimately Yokohama Advan questioned the arrangements and hence something needed to be done about it.

The rule changes thus far including the tyre situation has not dampened the interest in the event. Ian claimed there are approx 400 potential applicants for this years event! Last year 50-60 cars missed out so the event is large enough and is growing and therefore justifies the high competitor and entry costs. When asked about the overseas entries, not sponsored by Advan and how they are being impacted, Ian was not sure at this stage and was still working through it.

On a negative note, Ian has received huge interest in moving WTAC overseas to Asia (Thailand specifically) and America. There is big money being offered to do that however that would mean it can no longer be run in Australia. That's not what he wants however depending on the events financial performance this year that may be an eventuality. Just to be clear that is not being planned however like any business, if it doesn't work out you consider all your options.

In relation to the tyres, he didn't at first share any information on the support entrants would get on Advan tyres however later said a decision has not been made on whether or not entrants would receive support if they were to enter however I got the impression there may be some support offered.

great to see Ian supporting the release of honest and transparent information about the event.

As far as Yokohama supporting competitors; they have had exclusive agreements with various categories over the years (in particular IPRA), and in every case competitors had to buy tyres at full retail, or more. As an example, when we had to run A048Rs they cost 20% more than the much better dunlops at around $550 a corner.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
×
×
  • Create New...