Jump to content
SAU Community

Recommended Posts

Had larger pan with baffles and accumulator prior but had oil surge in 2 corners so updating to a dry sump set up that the guys are making up. I believe my bar is a trust copy from carmods Australia, gives good room to put oil coolers behind the bar. some good bars to choose from on your link, I liked em. Send me a pm when your headed back out to the island good to see your car in action.

Yeah I'm hoping an accumulator will fix my probs.

I know what I would do if my car was a dedicate track car and not a club car :) It would be awesome :)

Do tell!

Had larger pan with baffles and accumulator prior but had oil surge in 2 corners so updating to a dry sump set up that the guys are making up. I believe my bar is a trust copy from carmods Australia, gives good room to put oil coolers behind the bar. some good bars to choose from on your link, I liked em. Send me a pm when your headed back out to the island good to see your car in action.

Oil surge, dry sump needed!

I remember i had issues under severe braking with my wet sump plus accumulator setup. The accumulator slightly fixed the problem but stil, thel pressures were concerning eg 15psi at 5000rpm on down shift...... although the motor never spun a bearing I don't think it's worth chancing a expensive motor. ... dry sump has proved to be the solution :P

1:30s at Ec won it with a sequential shifted box.... I take it you will be doing the same Steve?

Any comments on 30vs35 series tyres? I'm thinking 35s for more feedback?

Memo is competing again, not sure on what some new teams are bringing here as yet but if tilton can get their car running right for once I reckon they can win.

To be getting aero done by voltex is the bomb... fingers crossed things go well as this car still looks like a evo lol

Can't wait for team America!!!!!! Hopefully it doesn't go to china again!!!

  • Like 1

Nooooo Russ..... loved following your progress through the high and lows over the years ;)

Richo, make sure you kick my mates supra from gorilla industries :P

haha f**k you, you yellow cnut!

Ill be back, but just for fun, nothing has changed. Cant let a stock ECR33 Beat me again this year :P

Think the Vader Supra will be back also.

Just FYI, in RWD Clubsprint, BYP are buidling an S2000, so they are one to keep an eye on too...always got something up their sleeves.

Other than that, I have no idea who else is competing. A mate is Building a Lexus ISF for Opens, pretty awesome build, and Tanaguchi has alread been booked to drive it

20130524_171745_zps4029f7e0.jpg

lol :whistling:

Yeh, BYP's S2000 will be mega fast for sure, though that chassis limits the amount of tyre you can put up front. I doubt very much they can fit a 265 on the front with the guards. I've spoken to Ian a couple of times regarding the guards and they are pretty steadfast on 'rolling' and not 'flaring' and that the top 1/3 must be within the body. As I wanted to run a 10.5" rim, but that wasn't going to fit without flaring the guard. So it will be interesting to see what they come up with.

I'd imagine there are a couple of workshop 86/BRZ with forced induction coming along?

Vader are going to have to do heaps to their car to meet this year regs, that should be interesting!

- wing too high

- front & rear guards flared

- front splitter too long

- side-skirts too low

Good luck to them, bashing the rear guard back into standard body line is going to be painful.

To be getting aero done by voltex is the bomb... fingers crossed things go well as this car still looks like a evo lol

Can't wait for team America!!!!!! Hopefully it doesn't go to china again!!!

Yeah I'd love to see Tilton beat Nemo. Nemo to me is just a rich kid with too much money choosing to dominate the progression of aero in time attack.

although the motor never spun a bearing I don't think it's worth chancing a expensive motor. ... dry sump has proved to be the solution :P

lucky my engine is only a $1000 engine from nissan! Dry sumps really cost a lot. I might give the accumulator a go as it's relatively cheap.

I remember i had issues under severe braking with my wet sump plus accumulator setup. The accumulator slightly fixed the problem but stil, thel pressures were concerning eg 15psi at 5000rpm on down shift...... although the motor never spun a bearing I don't think it's worth chancing a expensive motor. ... dry sump has proved to be the solution :P

1:30s at Ec won it with a sequential shifted box.... I take it you will be doing the same Steve?

Any comments on 30vs35 series tyres? I'm thinking 35s for more feedback?

Agree totally, dry sump is the way to go and save that engine if you can. That evo that one with paddle sequential was super quick with a gun driver at the wheel, budget doesn't allow for a sequential box so the ppg dogbox with a motec shift cut is what will stay, not as fast as the sequential but I have always loved shifting with the h pattern box(makes me feel like I'm a race car driver lol). Hear your going hollinger, awesome.

Tyres trying 35's first, not sure till both are tried, anyone else used one or the other jump in?

Yeah I'd love to see Tilton beat Nemo. Nemo to me is just a rich kid with too much money choosing to dominate the progression of aero in time attack.

They sure have dominated, but I'm thankful that they have as its pushed the quality and development to another level not seen before which is great for me anyhow. I have learnt so much in regards to aero since these aerodynamicists have been involved and my lap times have dropped big time. I think it's great that they have different classes for all, I love club sprint class...you rock up and drive the hell out of it then drive home, that's how I first started and was so much cheaper and got to be honest....a lot more fun more often.

lucky my engine is only a $1000 engine from nissan! Dry sumps really cost a lot. I might give the accumulator a go as it's relatively cheap.

. Accumulator will help, better to have than not at all.

Yeah I'd love to see Tilton beat Nemo. Nemo to me is just a rich kid with too much money choosing to dominate the progression of aero in time attack.

lucky my engine is only a $1000 engine from nissan! Dry sumps really cost a lot. I might give the accumulator a go as it's relatively cheap.

Tilton is more of what I'd class as a time attack car. Still very much looks like an Evo on the outside.

At the end of the day everyone is going to present cars to the limit of the rules, NEMO went right to the edge of the rule book. Good on them.

If I had the cash and resource I'd have done the same thing. Why not, it's about being the fastest within the rules. Look at those crazy carbon R35's from a couple of years back.

Russ did you see this?

http://www.skylinesaustralia.com/forums/topic/365583-dry-sumps-and-you/?p=6734475

Tilton is more of what I'd class as a time attack car. Still very much looks like an Evo on the outside.

At the end of the day everyone is going to present cars to the limit of the rules, NEMO went right to the edge of the rule book. Good on them.

If I had the cash and resource I'd have done the same thing. Why not, it's about being the fastest within the rules. Look at those crazy carbon R35's from a couple of years back.

Russ did you see this?

http://www.skylinesaustralia.com/forums/topic/365583-dry-sumps-and-you/?p=6734475

Agree totally, dry sump is the way to go and save that engine if you can. That evo that one with paddle sequential was super quick with a gun driver at the wheel, budget doesn't allow for a sequential box so the ppg dogbox with a motec shift cut is what will stay, not as fast as the sequential but I have always loved shifting with the h pattern box(makes me feel like I'm a race car driver lol). Hear your going hollinger, awesome.

Tyres trying 35's first, not sure till both are tried, anyone else used one or the other jump in?

Any idea how the shift cut works on the ppg/motec? I was advised that unless you invested in a strain gauge type shifter, ur highly likely to round off the gears... Is this what possibly happened to the ex bsm Gtr at Phillip island with 3rd failing?

Those semi dry sump kits look mint...Brighty runs it on the race 33gtst with great success is what I've been informed... I'm pretty sure Brad likes to keep the sump as close to stock as possible internally, as this was also the case in my full system.

Love your attention to detail re the rules Richo.... You've already psyched out your competition lol

Any idea how the shift cut works on the ppg/motec? I was advised that unless you invested in a strain gauge type shifter, ur highly likely to round off the gears... Is this what possibly happened to the ex bsm Gtr at Phillip island with 3rd failing?

We have been using a Motorsport systems strain gauge. I flat shift 3rd to 4th and clutch other gears, not sure how dean our driver does it, I'm still learning so I was advised to only flat change 3rd to 4th. I messgaed Ex bsm to find out what happened few days ago but no response as yet.

did any of you happen to notice Mik Sigworth'sefforts at the last qr time attack.

An owner driver with a car that doesnt look like its made from left over sputnik space junk literally obliterated nemo's bench mark on the sprint track.

50.3 seconds is around 1.5 seconds faster than nemo, Admittedly nemo had a pro shoe at superlap but Sigworth is driving in open class not pro.

Good luck to anyone trying to beat that team at the worlds.

did any of you happen to notice Mik Sigworth'sefforts at the last qr time attack.

An owner driver with a car that doesnt look like its made from left over sputnik space junk literally obliterated nemo's bench mark on the sprint track.

50.3 seconds is around 1.5 seconds faster than nemo, Admittedly nemo had a pro shoe at superlap but Sigworth is driving in open class not pro.

Good luck to anyone trying to beat that team at the worlds.

Micks car is a great car and a credit to him, particularly considering the rumour of the 7 figure sum that has been spent on it.

Couple of things though. Micks car is in Pro-Am not open.

http://www.worldtimeattack.com/index.php/pro-am-class-precision-maintenance-evo-9/

It also did its 50.3 on full slicks and thats still about 1.6 seconds off the V8 supercar times.

Nemo I dont believe has actually ever run in anger on the Sprint Track or Clubman, they only ever run on the National track and I believe at a practice session in November it set a 1.10.4 with the non pro and a 1.07.18 with a pro driver on the national.

Also i heard that Precision was doing practise this Wednesday at SMP and was 5+ seconds slower than nemo's record time.

There is still 4 months to go and Nemo I guess hasnt been seen on the track in awhile. So good luck to them both.

  • Like 2

Sure is a pro-am class, has heaps more aero on it. Still is super quick though. Last year open class cars were allowed to run full length flat floors which make a huge difference to grip and lap times. Those open class cars last year with the flat floors would not achieve the same times today if everything else was unchanged.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The fab work can be as simple as a couple of silicon hoses and clamps to the factory piping. 
    • Just sounds like either way you need to do some fab work to get everything to fit, so why limit yourself at that point? If the GCG high flow option is zero effort in and out swap though I'd probably do that. It's almost certainly lowest risk, lowest cost, etc. The HKS GTIII-RS option that Kapr mentioned is laughably expensive for what it is, they charge the exact same for two turbos on the RB26 so their margins are off the charts on that thing.
    • Intake manifold is not a part of the issue. The turbo bolts to the exhaust manifold. That is easy. But close your eyes and picture the physical situation. That is a T3 flange on the manifold and a T3 flange on the turbo. As long as any new turbo has a T3 flange on the exhaust housing, that exhaust housing will bolt to the exhaust manifold. This places the exhaust housing in the same place as the stock one. But now move your mental attention a little further forward. The location of the compressor housing is set by the length of the turbo's core. The stock turbo had a long core. Let's say that it is..... 100mm long. So that would place the compressor housing 100mm forward of the exhaust housing. But a highflow, might well have a centre core that is shorter. Let's say that it is only 70mm long. Now the compressor housing will be 30mm further back in the engine bay than the stock one. This DOES move the turbo's compressor outlet backwards. It also moves the compressor's inlet backwards. You will very likely have to do some work to both the inlet and outlet piping to make everything connect again. I am not say this to make it out to be a bigger deal than it is. I am just pointing out that "bolt on" is sometimes not quite bolt on. The highflow from GCG that Murray linked above (https://gcg.com.au/turbo-charger-upgrade-skyline-gtst-2iu-xtrgts-s1.html ) uses a core that is the same length as the stock core, and so does not require this extra work. It will look very much like the stock turbo. No-one uses GTR turbos of any flavour (stock, or aftermarket) in a single turbo application on RB20/25. It's not a thing. Yes, people have been putting on GT3076, GTX3076 (and bigger and smaller versions of those) and G30s (of various sizes) onto RB20/25 since forever. But these are not "bolt on". Everything except the 4 bolts to the exhaust manifold change with these. And genuine Garretts are expensive. Non-gen, like Pulsar, etc, are cheaper, variously as good or nearly as good. But still not bolt on. No-one in the right mind would pay for an HKS turbo. Not in this modern day and age. Well, yes, the GCG highflow. You could ask HG what he can do to make the compressor housing sit in the original location. There are surely others doing highflows around the world. And some of the eBay/Temu ones (as reported by Dose) work and don't die. Bit of a lottery though. I would send your turbo to GCG (here in Oz) to be highflowed if you want a trivial no-extra-work option. But seriously, the work required to change inlet and outlet piping is not that hard. That's a boost control problem, not a turbo problem.
    • Thank you all for the replys 🙂 I know that intake would be different but that is one pipe at it is not that hard to get(custom one). I meant mainly bolt to the stock manifold and the turbo elbow. I looked and many sites/forums but they are just "old" with some old HKS turbos from GT-R i guess? What about some Garrets?  Or any other turbo? Is there even a turbo which i can just bolt on? 😄 And yeah i know about that new HKS but that is like 2000k USD without taxes/shipping in here   Iam getting a touch up tune but my "problem" is that on the "not" hot day iam getting peaks around 0,9 bar...and when it was around 15 Celsious i saw peak around 1 bar which is just too much for stock turbo. And of course turbo is old and i like to get some new one for a piece of mind 🙂 
    • I'm working on the assumption that our friend Jasmine here is a Russian (or, possibly Ukrainian) spammer/spambot, based purely on the number of such that I have been having to neuter in the last few weeks. IP address for the OP above was in WA. But that could have been via VPN. Posting at quarter to 4 in the morning is a good sign of being from somewhere in Europe. The last Jasmine that I kicked in the cooch was IP addressed in Ukraine. Even that could have been via VPN, and the bitchbot could have been from Russia, Serbia, China or anywhere. Regardless, was a spambot, so I killed it with fire. The fact that our new friend Jasmine here did not respond in any way to my tart query strongly suggests to me that this OP was just the establishment phase of a user able to be activated for spamming in a week, or 3 or 10.
×
×
  • Create New...